OSB BOARD 22mm P.SER2,5x0,625
The photographs are for illustrative purposes only.
Get AI analytics on product OSB board 22 mm P.SER 2.5 x 0.625 m:
In stock
Product Code: 000-343095ASP
Specification
Fuel surcharge — 2.5%
The surcharge covers part of SityPro’s transport and logistics costs. Delivery to parcel lockers is charged without any additional markup — according to the carrier’s rate.
The surcharge covers part of SityPro’s transport and logistics costs. Delivery to parcel lockers is charged without any additional markup — according to the carrier’s rate.
22 mm OSB/3 Tongue-and-Groove Structural Panel, 2.5 × 0.625 m
Engineered OSB/3 wood panel profiled on all four sides with tongue-and-groove edges for structural use both indoors and outdoors; offers high bending strength, dimensional stability and a uniform wood surface suitable for structural and decorative application. Find features, benefits and buy options at SityPro.
Key Benefits
- High load-bearing capacity with strong bending, compression and tensile performance
- Excellent fastener holding, including near board edges
- Low swelling and surface partly resistant to wetting
- Suitable for diffusion-open and diffusion-closed construction systems
- Good thermal insulation and sound damping compared with similar materials
Exceptional dimensional stability and stiffness due to cross-oriented three-layer construction
Applications
Versatile structural panel for timber-frame and other load-bearing constructions, usable inside and outside and for certain decorative finishes.
- Roof sheathing and rafter decking
- Subflooring and structural floor elements
- Structural panels for exterior and interior assemblies (diffusion-open or closed)
- Decorative interior cladding where a uniform wood surface is desired
Wall sheathing in timber-frame constructions
What to Consider When Choosing
- Suitability for interior vs exterior exposure despite limited wetting resistance
- Compatibility with diffusion-open or diffusion-closed construction designs
- Fastening method and edge support to exploit excellent fastener holding
- Compliance with relevant standards and formaldehyde class for your project
Required thickness and mechanical performance for the intended structural application
Specifications
- Profile: four-sided profiled, tongue-and-groove
- Thickness: 22 mm
- Declared standards: EN 300 (type OSB 3); EN 13501-1: class D-s1, d0; EN 13986:2004+A1:2015
- Formaldehyde class: E1 (EN 120)
- Surface: uniform wood surface, partly resistant to wetting
- Package weight: 20.65 kg
- Package measurements: 250.00 × 62.50 × 2.20 cm (2.5 × 0.625 m nominal panel size)
Panel type: OSB/3 (three-layer, cross-oriented)
Why Buy from SityPro
- Competitive price and transparent information on standards and formaldehyde class
- Reliable delivery options to Estonia and Finland
- Convenient customer support and product guidance for correct application
- Secure packaging and measured package dimensions for transportation
Easy online buy process with clear product features and specifications
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the OSB board 22 mm P.SER 2.5 x 0.625 m
What is OSB BOARD 22mm P.SER2,5x0,625 and what is it used for?
OSB BOARD 22mm P.SER2,5x0,625 is a four-sided profiled OSB/3 panel, 22 mm thick, made of three cross-oriented layers. It is used for timber frame structures, subfloors, wall sheathing and decorative applications indoors and outdoors due to its dimensional stability and good mechanical strength.
Which standards and formaldehyde class does OSB BOARD 22mm P.SER2,5x0,625 meet?
The board meets EN 300 (type OSB 3), EN 13501-1 class D-s1, d0 and EN 13986:2004+A1:2015 standards. Formaldehyde class is E1 (EN 120), indicating low controlled emissions suitable for interior use.
Is OSB BOARD 22 mm suitable for outdoor use?
OSB BOARD 22mm P.SER2,5x0,625 is intended for both indoor and outdoor use, but for prolonged exterior exposure you should apply additional protection against moisture and UV (waterproofing or surface treatment).
What load-bearing role does the OSB/3 22 mm board play in frame structures?
The OSB/3 22 mm board provides stiffness and load distribution in wall and roof frames due to its layered construction; 22 mm is suitable for sheathing and subflooring under moderate loads. For structural applications check deflection calculations and joist spacing.
How to fix OSB BOARD 22mm P.SER2,5x0,625 — which fasteners and spacing?
Fix the 22 mm OSB with galvanized wood screws or nails, typically 150–200 mm at edges and 200–300 mm across the field depending on load. Countersink heads slightly and leave expansion gaps between boards for thermal movement.
Can OSB 22 mm be used as a finished decorative surface without further coating?
The board has a uniform wood surface suitable for decorative use, but for durability and protection against dirt and moisture you should apply varnish, paint or oil. Uncoated OSB may darken and wear under frequent use.
What are the dimensions of OSB BOARD 22mm P.SER2,5x0,625 — is there a standard format?
The name P.SER2,5x0,625 denotes a standard format of 2.5×0.625 m (2500×625 mm) with a thickness of 22 mm. The board is profiled on four sides (tongue-and-groove) to simplify installation.
How does OSB/3 differ from other OSB types and why is OSB/3 used in this board?
OSB/3 is designed for higher moisture exposure and load-bearing applications compared with OSB/2. OSB/3 in this board provides improved bending strength and mechanical performance for frame structures and exterior sheathing (with appropriate protection).
Can you saw and drill OSB BOARD 22mm P.SER2,5x0,625 with standard woodworking tools?
Yes — the 22 mm OSB can be cut with circular or handsaws and drilled with standard wood bits. Use dust protection as OSB produces dense fine dust.
What maintenance does OSB BOARD 22mm P.SER2,5x0,625 require after installation?
Regularly inspect protective finishes at joints and edges and renew coatings when needed. Avoid prolonged water exposure, ensure ventilation and clean the surface with a soft brush.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro
