Frequently asked questions about the Electric industrial heaters category
What are Electric industrial heaters and what are they used for?
Electric industrial heaters are portable or fixed fan heaters and calorifiers (e.g. STANLEY, MASTER, BALLU) designed for industrial and construction use, with power ratings typically from 1.3 to 9 kW. They are used for space heating, drying and local heating of workshops and building sites.
What heater power do I need for a 30 m² workshop?
For a 30 m² workshop you typically need 3–5 kW depending on ceiling height and insulation. Choose 3 kW for well-insulated spaces and closer to 5 kW for poor insulation; models from BALLU and MASTER cover this range.
What's the difference between 230V single-phase and 400V three-phase STANLEY models?
230V single-phase models are compact and suited for smaller sites with power up to about 3.3 kW. 400V three-phase STANLEY heaters deliver higher power (up to 9 kW) and require three-phase supply typical for industrial or large construction use.
Can I use NOVIPRO 1000/2000W in a house?
Yes — NOVIPRO 1000/2000W runs on 230V and is suitable for small residential rooms. Its selectable 1/2 kW power is good for local heating, but check your household wiring and fuse capacity.
Which models suit a construction site with high heat demand?
For construction sites choose 400V three-phase STANLEY models (9 kW or 5 kW) or the MASTER EPB 5 kW, designed for heavy-duty use. Pick units with overheat protection and rugged casing for site conditions.
Which heater to choose for a low-ceiling garage?
Choose a compact 230V unit such as STANLEY 1300/2000W or NOVIPRO 1500/3000W for a low-ceiling garage. They give sufficient warm airflow without excessive power; look for adjustable power and directional airflow.
What are the differences between BALLU BHP-P2-3 and BHP-M-3 in power and features?
The BALLU BHP-P2-3 is a 220–230V 3 kW unit typically with a mains plug, while BHP-M-3 (MASTER) may be supplied without a plug or with industrial cable for hard wiring. Functionally similar, so check for thermostat and power settings.
How to choose a heater for drying fresh plaster?
Pick a unit with adjustable power and steady airflow such as STANLEY 2.5–5 kW or MASTER EPB 3.3–5 kW. Use moderate temperatures and continuous air circulation to avoid overdrying the surface.
What features do MASTER EPB (2–5 kW) fan heaters have?
MASTER EPB 2–5 kW heaters typically offer multiple power settings, a robust casing and overheat protection; some include a thermostat for temperature control. They are designed for professional use on sites and in workshops.
Can I use a fan heater to dry paint and which models suit?
Yes — use adjustable-power units like STANLEY 1.3–2 kW or NOVIPRO 1000/2000W for paint drying. Avoid excessive temperatures and direct airflow to the surface; angle the flow to prevent runs.
What safety measures are important when using electric industrial blowers?
Ensure proper earthing, correct supply (230V/400V), intact cable and plug, and use overheat protection; STANLEY and MASTER units include protective circuits. Do not block air intakes or place the heater near combustible materials.
New Arrivals in the Electric industrial heaters Category in 2026
- FAN HEATER NOVIPRO 1500/3000W 230V — 63.48€
- FAN HEATER NOVIPRO 1000/2000W 230V — 61.36€
- FAN HEATER STANLEY 2500/5000W 400V 3-FAASI — 91.08€
- FAN HEATER MASTER EPB 5KW 400V — 201.48€
- FAN HEATER MASTER EPB 2KW — 127.88€
Best sellers in the Electric industrial heaters category in 2026
- FAN HEATER MASTER EPB 5KW 400V — 201.48€
- FAN HEATER MASTER EPB 2KW — 127.88€
- FAN HEATER STANLEY 2500/5000W 400V 3-FAASI — 91.08€
- FAN HEATER NOVIPRO 1000/2000W 230V — 61.36€
- FAN HEATER NOVIPRO 1500/3000W 230V — 63.48€
Cheap products in the Electric industrial heaters category
- FAN HEATER NOVIPRO 1000/2000W 230V — 61.36€
- FAN HEATER NOVIPRO 1500/3000W 230V — 63.48€
- FAN HEATER STANLEY 2500/5000W 400V 3-FAASI — 91.08€
- FAN HEATER MASTER EPB 2KW — 127.88€
- FAN HEATER MASTER EPB 5KW 400V — 201.48€
Expensive products in the Electric industrial heaters category
- FAN HEATER MASTER EPB 5KW 400V — 201.48€
- FAN HEATER MASTER EPB 2KW — 127.88€
- FAN HEATER STANLEY 2500/5000W 400V 3-FAASI — 91.08€
- FAN HEATER NOVIPRO 1500/3000W 230V — 63.48€
- FAN HEATER NOVIPRO 1000/2000W 230V — 61.36€
Price of products in the Electric industrial heaters Category
Electric industrial heaters: 49.48€ — 162.48€ (5)