Frequently asked questions about the Polystyrene products for facades category
What are Polystyrene products for facades?
Polystyrene products for facades are thermal and acoustic insulation boards made of expanded polystyrene (EPS), available in sizes such as 100x600x1000 mm and 150x600x1000 mm. Models include EPS60F, EPS60 SILVER and ACOUSTIC, used for external wall insulation within plastered façade systems.
What is the difference between EPS60F and EPS60 SILVER in polystyrene facade products?
EPS60F is a dense standard EPS insulation board available in thicknesses like 50, 100 and 150 mm; EPS60 SILVER has a reflective surface to improve thermal performance and is offered in 50 and 100 mm. Both are suitable for external plaster systems, with SILVER providing additional radiant heat reflection.
What is POLYSTYRENE EXPANDED ACOUSTIC 30x1000x1000 used for in a façade system?
The ACOUSTIC 30x1000x1000 is a 30 mm thick acoustic EPS panel (1000x1000 mm) designed to improve sound insulation by reducing airborne and impact noise transmission. It’s typically installed alongside the main thermal insulation layer to enhance acoustic comfort.
What are the standard board sizes in the Polystyrene products for facades range?
The range includes boards sized 100x600x1000 mm and 150x600x1000 mm, with some items offered in 0.72 m³ and 0.6 m³ packs. Thicknesses available include 30 mm (ACOUSTIC), 50 mm, 100 mm and 150 mm depending on the model.
Is POLYSTYRENE EXPANDED EPS60F suitable for external insulation of a multi-storey building?
Yes, EPS60F is a dense EPS insulation intended for external façade insulation and is suitable for plastered systems on multi-storey buildings. Choose the appropriate thickness (50–150 mm) based on the project’s thermal specification.
Can ACOUSTIC 30 mm be combined with EPS60F boards in one façade system?
Yes, the ACOUSTIC 30 mm panel can be installed together with EPS60F boards—either above or below the main thermal layer—to improve sound insulation. Ensure correct fixing methods and joint treatment are followed for compatibility within a plastered façade system.
What packaging options are available for POLYSTYRENE EPS60F 100x600x1000?
The EPS60F 100x600x1000 board is offered as individual boards and in 0.72 m³ bulk packs as listed in the range. The 0.72 m³ pack helps simplify volume calculations for a project.
What effect does the 100 mm thickness of EPS60 SILVER have on façade thermal insulation?
A 100 mm EPS60 SILVER board provides significant thermal resistance, and its reflective surface further reduces heat losses. This setup is suitable for buildings with higher energy-efficiency requirements.
Are EPS60F 50x600x1000 boards suitable for insulating plinths or small façade projections?
Yes, EPS60F 50x600x1000 (50 mm) boards are suitable for insulating plinths, reveals and small projections due to their low profile and standard 600 mm width. Careful cutting and correct fixing are required to avoid thermal bridging.
How to calculate the required number of boards in a 0.72 m³ pack for a façade project?
Calculate the façade total area in m² and divide by the area of one board (e.g. 0.6 m x 1.0 m = 0.6 m²). Then check the product details to see how many boards are in the 0.72 m³ pack; dividing the area by one board area gives the number of boards needed.