Frequently asked questions about the Piping protection category
Piping protection — what is it and why do I need it?
Piping protection — is a set of solutions (for example self-regulating heating cables and cable glands) designed to prevent pipe freezing, corrosion and damage. The Sitypro category includes self-regulating heating cables from 2 m to 20 m and ENSTO cable glands for secure feed-throughs.
What is the difference between KÜTTEKAABEL ISEREGULEERUV 2M/18W and 20M/180W?
They differ by length and power: 2 m/18 W suits small feed-throughs or local heating zones, while 20 m/180 W covers long pipe runs and higher heat loss. Choose based on required W/m and the total protected length.
How to choose heating cable power for a pipeline?
Base choice on W/m rating and total pipe length: use higher W/m for exposed sections with high heat loss, lower for insulated/indoor sections. The range includes 10 W/m cables and ready lengths from 18 to 180 W.
What is KÜTTEKAABLI LÄBIVIIK ENSTO and where to use it?
The ENSTO cable gland is a sealing feed-through for routing heating cables into boilers, tanks or enclosures, providing mechanical protection and watertighting. Use it when installing self-regulating cables through metal or plastic surfaces.
Are self-regulating cables suitable for outdoor pipelines?
Yes, the self-regulating heating cables in this category can be used outdoors and indoors when properly mechanically protected and fixed. For outdoor use pick appropriate length/power and use ENSTO feed-throughs at entry points.
How to install a self-regulating cable on a pipe — are there ready lengths?
Cables come in ready lengths: 2, 3, 4, 10, 15 and 20 m with 18–180 W. Install along the pipe, fixing with clamps every 30–50 cm and sealing feed-throughs with ENSTO glands.
Can I combine multiple cables for a long pipeline?
Yes, multiple ready sections can be used in series or parallel for long runs following manufacturer limits on feed length and conductor size. Ensure total power and wiring method match the electrical installation.
What is the typical power per metre of these cables?
The range includes a cable rated at 10 W/m and ready lengths with total power from 18 W to 180 W, enabling selection of appropriate heat density per section.
Are these solutions suitable to protect against internal corrosion?
Heating cables do not prevent chemical corrosion but reduce condensation and moisture accumulation, lowering the risk of internal corrosion. For full protection combine cables with anti-corrosion coatings and drainage solutions.
What is drainage protection and is it needed with a heating cable?
Drainage protection means removing water and condensate from low points of a pipeline to prevent flooding and corrosion. Combined with a self-regulating cable it increases reliability: the cable prevents freezing while drainage removes accumulated moisture.
New Arrivals in the Piping protection Category in 2026
Best sellers in the Piping protection category in 2026
Cheap products in the Piping protection category
Expensive products in the Piping protection category
Price of products in the Piping protection Category
Piping protection: 29.68€ — 208.48€ (7)