Reinforcement is an integral element in modern construction, playing a key role in strengthening structures. The steel base used as reinforcement increases the strength of concrete elements such as foundations, load-bearing columns and other building structures. This reinforcement process ensures the stability and durability of structures, allowing them to withstand significant loads and operating conditions. Thanks to reinforcement, construction becomes more reliable and safe, and buildings and structures are able to serve for many years, providing comfort and safety for residents and users.
Frequently asked questions about the Reinforcement steel category
What is Reinforcement steel and what is it used for in construction?
Reinforcement steel is steel rebar used to reinforce concrete elements such as foundations, load-bearing columns and slabs. It increases concrete strength and durability; the range includes diameters D6–D16 and lengths 2000–6000 mm.
What diameters and lengths of reinforcement steel are available in the catalogue?
The range includes diameters D6, D8, D10, D12 and D16 with standard lengths of 2000 mm, 3000 mm and 6000 mm. Top items include REINFORCEMENT STEEL D10 L=2000 and D12 L=6000.
What is the difference between plain and deformed rebar and which is better for foundations?
Plain rebar has a smooth surface and lower bond with concrete; deformed rebar has ribs that provide improved bonding. For foundations deformed rebar of D10–D16 is commonly recommended to ensure secure anchorage and load distribution.
Which reinforcement steel is suitable for monolithic walls and load-bearing columns?
For monolithic walls and load-bearing columns reinforcement of D10–D16 is commonly used depending on calculated loads. Bars of 3000–6000 mm length allow frame fabrication; D8–D10 are used where closer mesh is required.
How to choose reinforcement diameter for a private house foundation?
Diameter depends on structural calculations; private houses commonly use D10–D16 for main longitudinal bars and D8 for distribution mesh. A structural engineer should specify the exact diameter based on loads and foundation type.
Can reinforcement steel be welded together and what connections are used?
Welding is possible for some steel grades, but mechanical connections—tying with wire, clamps and couplers—are more common. The catalogue also includes ready-made items like FIBO BI-ARMATUUR for faster frame assembly.
What does the marking D12 L=6000 on a product mean?
D12 L=6000 denotes a 12 mm diameter reinforcement bar with a length of 6000 mm. These bars are used for load-bearing elements and frame assembly with fewer joints.
What prefabricated reinforcement elements are in the catalogue?
The catalogue includes prefabricated items like FIBO BI-ARMATUUR 2JM/TK, FIBO BI-ARMATUUR 4JM/TK and galvanized FIBO BI-ARMATUUR ZN 2JM/TK to speed up mesh and frame installation without cutting individual bars.
Which is better for reinforcing a concrete slab — D8 or D10?
The choice between D8 and D10 depends on design loads and mesh spacing: D8 suits lighter loads with closer spacing, while D10 provides higher strength at the same spacing. Follow your structural engineer’s specifications.
How to store reinforcement steel on site to prevent corrosion?
Store bars off the ground on supports, under cover with good ventilation and drainage to keep moisture away. For greater corrosion resistance use galvanized options like FIBO BI-ARMATUUR ZN.
New Arrivals in the Reinforcement steel Category in 2026
- FIBO BI-ARMATUUR 4JM/TK — 2.60€
- FIBO BI-ARMATUUR 2JM/TK — 1.67€
- REINFORCEMENT STEEL D16 L=6000 — 16.76€
- REINFORCEMENT STEEL D12 L=6000 — 9.68€
- REINFORCEMENT STEEL D12 L=3000 — 5.06€
Best sellers in the Reinforcement steel category in 2026
- REINFORCEMENT STEEL D12 L=2000 — 4.60€
- REINFORCEMENT STEEL D12 L=3000 — 5.06€
- REINFORCEMENT STEEL D 6 L=2000 — 1.19€
- REINFORCEMENT STEEL D12 L=6000 — 9.68€
- REINFORCEMENT STEEL D 6 L=3000 — 1.38€
Cheap products in the Reinforcement steel category
- REINFORCEMENT STEEL D 6 L=2000 — 1.19€
- REINFORCEMENT STEEL D 6 L=3000 — 1.38€
- REINFORCEMENT STEEL D 8 L=2000 — 1.55€
- FIBO BI-ARMATUUR 2JM/TK — 1.67€
- REINFORCEMENT STEEL D 8 L=3000 — 1.74€
Expensive products in the Reinforcement steel category
- REINFORCEMENT STEEL D16 L=6000 — 16.76€
- REINFORCEMENT STEEL D12 L=6000 — 9.68€
- REINFORCEMENT STEEL D10 L=6000 — 6.60€
- REINFORCEMENT STEEL D12 L=3000 — 5.06€
- REINFORCEMENT STEEL D12 L=2000 — 4.60€
Price of products in the Reinforcement steel Category
Reinforcement steel: 0.96€ — 13.52€ (15)