Frequently asked questions about the Chisels, lances category
What are Chisels, lances and what is the MEISLITE KOMPLEKT SDS+ 4 TK kit used for?
Chisels and lances are handheld or power-tool attachments for chiselling and breaking materials like concrete, brick and stone. The MEISLITE KOMPLEKT SDS+ 4 TK is a four-piece SDS+ set designed for SDS+-type rotary hammers, ideal for demolition, scraping and edge cutting.
Will the MEISLITE KOMPLEKT SDS+ 4 TK chisels fit my SDS+ rotary hammer?
Yes — the MEISLITE KOMPLEKT SDS+ 4 TK is manufactured for SDS+ shank fittings. Confirm your rotary hammer accepts SDS+ bits to ensure correct locking and safe operation.
What sizes and types are included in the MEISLITE KOMPLEKT SDS+ 4 TK kit?
The MEISLITE KOMPLEKT SDS+ 4 TK includes four SDS+ bits of differing profiles (e.g. pointed and flat/chisel types) in standard rotary hammer lengths. Exact dimensions and profiles are listed on the product page.
When should I use the pointed chisel vs the flat chisel in the MEISLITE kit?
Use the pointed chisel for breaking dense concrete and targeted demolition; use the flat/chisel bit for removing tiles, plaster and scraping/smoothing surfaces. Choose pointed for demolition, flat for removal and surface work.
Can these chisels be used on reinforced concrete?
MEISLITE SDS+ chisels are suitable for concrete, but contact with reinforcement will accelerate wear. Use cutting tools for rebar and proceed cautiously when chiselling reinforced concrete to minimise damage to the bits.
How do I maintain MEISLITE SDS+ chisels to extend their life?
Clean bits of dust and debris after use, inspect the SDS+ shank for deformation and store in a dry place. Re-grind worn flat edges if needed and replace heavily worn bits to maintain performance.
Are these chisels suitable for brick and stone as well as concrete?
The MEISLITE SDS+ 4 TK set is suitable for concrete, brick and natural stone. Choose the specific bit (pointed for breaking, flat for removal) according to material and task.
How many pieces are in the MEISLITE KOMPLEKT SDS+ 4 TK and are spare parts included?
The MEISLITE KOMPLEKT SDS+ 4 TK contains four SDS+ bits. No spare parts are included, but individual bits can be purchased separately if needed.
Can I use these chisels on a rotary hammer without the hammering function?
SDS+ chisels require the hammering mode of a rotary hammer for effective work. Without an impact function they'll be inefficient and wear out much faster.
How can I tell genuine MEISLITE SDS+ chisels from cheap fakes when buying?
Genuine MEISLITE SDS+ bits typically have marking on the shank, precise slot machining and even metal finish. Check packaging quality and verify dimensions and profiles against the product specification.