In Stock
28.52€ / box
Ex Tax: 23.00€ / box
0.29€ / pc.
In Stock
17.48€ / box
Ex Tax: 14.10€ / box
0.17€ / pc.
In Stock
17.48€ / box
Ex Tax: 14.10€ / box
0.17€ / pc.
In Stock
41.40€ / box
Ex Tax: 33.39€ / box
0.41€ / pc.
In Stock
41.40€ / box
Ex Tax: 33.39€ / box
0.41€ / pc.
In Stock
41.40€ / box
Ex Tax: 33.39€ / box
0.41€ / pc.
In Stock
28.52€ / box
Ex Tax: 23.00€ / box
0.29€ / pc.
In Stock
28.52€ / box
Ex Tax: 23.00€ / box
0.29€ / pc.
Frequently asked questions about the Facade materials category
What are facade materials and what are they used for?
Facade materials are products for external wall finishing: plinth/plinth plates, siding, drip edges, joint trims and other trims. They protect the building from water and wind, improve thermal performance and provide a finished architectural appearance.
Which facade materials are suitable for a private house?
For a private house choose siding, plinth plates (e.g. 8×410×1250 mm or 8×600×1250 mm) and trims like drip edges and external corners. These items match dimensionally and provide plinth protection, water run‑off and a neat finish.
What is the difference between plinth plates 8×410×1250 mm and 8×600×1250 mm?
8×410×1250 mm plinth plates are lower and suit shallower plinth heights, while 8×600×1250 mm provide greater coverage and protection for taller plinths. Both serve as cladding and are compatible with TEMPSI trims.
What colours and finishes are available for TEMPSI trims?
TEMPSI trims come in shades like RR23 (dark grey), RR30 (beige) and RR20 (white). Finishes are durable polyester or similar roofing coatings designed to withstand weathering.
Which profile is used to seal facade joints?
Use a joint trim (vuugiliist/saumalista) 1250 mm long, e.g. TEMPSI VUUGILIIST 1250 mm. It covers panel joints and prevents water ingress.
When is a drip edge needed and what sizes do TEMPSI drip edges come in?
A drip edge is needed at roof‑to‑facade junctions and above windows to direct water away. TEMPSI drip edges are available in 1250 mm and 2000 mm lengths and in colours such as RR23, RR30 and RR20.
Is siding compatible with the plinth plates in the range?
Yes, siding is compatible with the plinth plates and TEMPSI trims: profiles and connection parts use standard dimensions (commonly 1250 mm). This ensures neat junctions and adequate plinth protection.
What external corners and transition elements are available?
The range includes external corners (ULKOKULMA/external corner) 1250 mm long and various connector elements for junctions with vertical walls. They come in matching colours (RR23, RR30) for discreet joints.
What sizes of trims are most commonly used (lengths and widths)?
Common sizes are 1250 mm length for trims and 2000 mm for some drip edges; plinth plates come as 8×410×1250 mm, 8×600×1250 mm and 8×1250×410 mm. These dimensions facilitate installation and compatibility.
Which elements are needed to join the facade to a vertical wall (eternit connection)?
Use ETERNIIDI ÜHENDUSELEMENT/ETERNIIDI OTSAKATE connector elements, typically 1250 mm long in the matching colour. They create a neat junction and protect the seam from moisture.
New Arrivals in the Facade materials Category in 2026
Best sellers in the Facade materials category in 2026
Cheap products in the Facade materials category
Expensive products in the Facade materials category
Price of products in the Facade materials Category
Facade materials: 7.35€ — 95.71€ (36)