Frequently asked questions about the Respirators category
Respirators — what are they and what are they used for?
Respirators are personal protective equipment that filter airborne particles, dust and aerosols during work. The Respirators category includes FFP1/FFP2/FFP3 models, reusable face masks with replaceable filters and disposable dust masks for construction, sanding and chemical work.
What is the difference between FFP1, FFP2 and FFP3 respirators?
FFP1 protects against larger particles and low dust concentrations; FFP2 filters at least 94% of particles suitable for construction and some medical uses; FFP3 gives the highest protection (around 99%) against fine aerosols and hazardous particles.
Which respirator to choose for construction dust and sanding?
For construction dust and sanding, choose FFP2 or FFP3 depending on dust level: FFP2 for typical dust, FFP3 for high concentrations of fine particles. Look for models with an exhalation valve and secure fit, e.g. JSP FFP2/FFP3 options in the range.
3M respirators — which models are available and how do they differ?
The range includes 3M products such as 3M Aura 9312 (FFP1) and replaceable filters 3M P2 2125 / P3 6035 for 3M 6000 series half masks. Differences are filter class (P2 vs P3), compatibility with 6000 series masks, and presence of exhalation valves.
What does the P2/P3 marking on respirator filters mean?
P2/P3 indicate cartridge filter classes: P2 captures medium-sized particles and corresponds to FFP2-level protection; P3 is the highest level, similar to FFP3, for the finest and most hazardous particles.
Which to choose — reusable mask with filter or disposable dust mask?
Choose a reusable mask with replaceable filters for regular work or when gas/vapour protection is needed (3M 6000 filters). Disposable FFP1/FFP2 dust masks suit short tasks and general household protection.
Are there respirators with a valve and what is the advantage?
Yes — models with exhalation valves are available (e.g. JSP P2V/P3V). A valve eases exhalation and reduces moisture build-up inside the mask, improving comfort during long use, but it does not filter exhaled air.
How to check that a respirator fits correctly on the face?
A correct fit has no visible gaps, an adjustable nose clip and secure straps. Do a leak check by covering the mask and taking a few sharp inhales/exhales — if you feel air entering, adjust the mask or change size (S/M, M/L, L/XL available).
Can respirators be used for protection against viruses and biological agents?
FFP2/FFP3 respirators are suitable for protection against aerosols and fine particles, including some biological particles. Ensure EN149 certification and proper fit; disposable FFP1 is not adequate for high biological risk situations.
What accessories and replacement filters are available for half masks?
Half masks (e.g. 3M 6000, JSP Force) have replaceable P2/P3 filters, pre-filters and fittings available. The range includes 3M P2 2125 and 3M P3 6035 filters and compatible cartridge options.
How to care for a reusable mask and how often to change filters?
Clean reusable masks per manufacturer instructions with mild soap and warm water, avoiding damage. Replace filters based on work intensity and contamination — when breathing becomes harder or filters look soiled; pre-filters typically require more frequent replacement.
New Arrivals in the Respirators Category in 2026
Best sellers in the Respirators category in 2026
- RESPIRATOR FFP3 JSP P3V VÄLJAHINGAMISKLAPIGA — 3.87€
- RESPIRATOR 3M AURA 9312 FFP1 KLAPIGA — 2.48€
- DUST MASK CE FFP1-EN149 2tk. — 3.68€
- FACE PROTECTION VISIIR EP — 5.98€
- MASK JSP FORCE 8 suurus M — 36.70€
Cheap products in the Respirators category
Expensive products in the Respirators category
- TÄISMASK JSP Force10 Typhoon — 177.47€
- MASK BLS 4100NEXT A2P2 FILTERGA — 48.67€
- MASK JSP FORCE 8 suurus M — 36.70€
- MASK JSP FORCE 8 suurus L — 36.70€
- MASK 3M 6000 M FILTRETA — 33.95€
Price of products in the Respirators Category
Respirators: 1.34€ — 143.12€ (24)