OSB BOARD 18mm p.serv2,5x1,25
The photographs are for illustrative purposes only.
Get AI analytics on product OSB board 18 mm, plain edge, 2.5 × 1.25 m:
In stock
Product Code: 000-338089ASP
Specification
| Package dimensions | 250,00 x 125,00 x 1,80 cm |
| Net weight | 33,920 kg |
18 mm OSB/3 Profiled Panel with Tongue-and-Groove (2.5 x 1.25 m)
Durable, cross‑layered OSB/3 panel designed for structural and decorative use both indoors and outdoors; suitable for timber‑frame constructions and applications where dimensional stability and load capacity are required.
Key Benefits
- Excellent dimensional stability and stiffness due to cross‑oriented three‑layer construction
- High load‑bearing performance with strong bending, compression and tensile values
- Very good fastener holding, including close to panel edges
- Low swelling value and surface partially resistant to wetting
- Good thermal insulation and sound dampening compared with similar materials
- Suitable for use in diffusion‑open and diffusion‑closed construction systems
Environmentally friendly wood‑based board for interior and exterior use
Applications
Used where structural strength and stable panel performance are needed; suitable for both load‑bearing and decorative applications.
- Exterior and interior wall and roof panels
- Decorative interior surfaces and finishes
- Construction systems that are diffusion‑open or diffusion‑closed
Timber‑frame structural sheathing
What to Consider When Choosing
- Check edge profile: four‑sided profiled with tongue‑and‑groove for panel joining
- Verify standards and safety: EN 300 (OSB 3), EN 13501‑1 classification and EN 13986 compliance
- Note formaldehyde class E1 (EN 120) if indoor air quality is a concern
- Consider suitability for moist conditions and partial surface resistance to wetting
Confirm the board type: OSB/3 three‑layer, cross‑oriented construction for high mechanical performance
Specifications
- Edge: Four‑sided profiled, tongue‑and‑groove
- Standards: EN 300 (type OSB 3); EN 13501‑1: class D‑s1, d0; EN 13986:2004+A1:2015
- Formaldehyde class: E1 (EN 120)
- Panel dimensions (package): 250.00 x 125.00 x 1.80 cm (2.5 x 1.25 m, 18 mm thickness)
- Total weight (package): 33.92 kg
Type: OSB/3 (three cross‑oriented layers)
Why Buy from SityPro
- Competitive price and transparent specification listing for informed purchase decisions
- Convenient ordering and customer support for product selection and application advice
- Delivery available to Estonia and Finland for fast site supply
- SityPro assistance with suitability for your intended application and benefits of the product
Easy to buy online with clear product features and price information on SityPro
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the OSB board 18 mm, plain edge, 2.5 × 1.25 m
What is OSB BOARD 18mm p.serv2,5x1,25 and what is it used for?
OSB BOARD 18mm p.serv2,5x1,25 is a four‑sided profiled OSB/3 panel, 18 mm thick with tongue‑and‑groove edges and three cross‑oriented layers. It’s used for timber frame structures, subfloors, wall sheathing and decorative applications indoors and outdoors when protected from direct moisture.
What standards and formaldehyde class does OSB BOARD 18mm p.serv2,5x1,25 meet?
The board complies with EN 300 (type OSB 3), EN 13501‑1: class D‑s1, d0 and EN 13986:2004+A1:2015. Formaldehyde classification is E1 (EN 120), indicating low emission.
How does OSB/3 with tongue‑and‑groove 18 mm differ from other OSB boards?
OSB/3 has enhanced moisture resistance and mechanical strength due to its three‑layer cross‑oriented construction. The tongue‑and‑groove profiled edges simplify panel joining and provide a flatter surface for flooring and cladding.
Can this OSB board be used for flooring and how should it be fixed?
Yes, OSB BOARD 18mm p.serv2,5x1,25 is suitable for subfloor/structural floor use with a suitable substructure. Fix with wood screws or flooring nails at joints every 150–200 mm and across the field every 200–300 mm, taking the tongue‑and‑groove joint into account.
Do I need to treat the 18 mm OSB board before outdoor use?
Yes, OSB BOARD 18mm p.serv2,5x1,25 should be protected with paint, varnish or a waterproof membrane for outdoor use; it resists moisture but is not for continuous immersion. Treatment extends service life and preserves dimensional stability.
What are the dimensions of this OSB board and what does p.serv2,5x1,25 mean?
The product name denotes a profiled panel and p.serv2,5x1,25 refers to the profile/layout specification. Thickness is 18 mm; exact length/width dimensions are provided in the technical details for model A005756SP.
Is this OSB board suitable for a timber frame house and what are the benefits?
Yes, OSB BOARD 18mm p.serv2,5x1,25 is suitable for timber frame houses due to OSB/3’s bending strength. Benefits include dimensional stability, a uniform wood surface and easy assembly with tongue‑and‑groove joints.
Can the 18 mm OSB board be cut and routed on site?
Yes, OSB BOARD 18mm p.serv2,5x1,25 can be cut and routed on site due to its uniform wood surface. Use dust protection and a fine‑tooth blade for neat cuts.
What is the fire performance of the 18 mm OSB board?
The board is classified under EN 13501‑1 as D‑s1, d0, indicating its reaction to fire and level of smoke production. For higher fire‑resistance requirements, additional fire‑retardant treatments or materials should be used.
Can the 18 mm OSB board be used for interior decorative cladding?
Yes, OSB BOARD 18mm p.serv2,5x1,25 has a uniform wood surface suitable for decorative wall cladding and furniture. Sand and finish with paint or varnish to improve appearance.
Where to buy OSB board 18 mm, plain edge, 2.5 × 1.25 m?
You can buy OSB board 18 mm, plain edge, 2.5 × 1.25 m in our online store for 26.53€. Category: OSB boards.
What is the price of OSB board 18 mm, plain edge, 2.5 × 1.25 m?
The current price of OSB board 18 mm, plain edge, 2.5 × 1.25 m is 26.53€. Brand: Tootja puudub.
OSB board 18 mm, plain edge, 2.5 × 1.25 m — specifications and description
Model: 000-338089ASP. Category: OSB boards. Brand: Tootja puudub. Price: 26.53€.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro
