OSB BOARD 22mm 2500X1250
The photographs are for illustrative purposes only.
| Package dimensions | 250,00 x 125,00 x 2,20 cm |
| Net weight | 41,310 kg |
22 mm OSB/3 Construction Panel, 2500 × 1250 mm
Structural OSB/3 panel for interior and exterior use — designed for timber-frame constructions and general building applications. Use this listing on SityPro to compare price, buy online, and review features and benefits.
Key Benefits
- High load-bearing capacity with strong bending, compression and tensile resistance
- Good fastener holding, including near panel edges
- Low swelling and surface partially resistant to wetting
- Suitable for diffusion-open and diffusion-closed construction systems
- Improved thermal insulation and sound damping compared with similar materials
Excellent dimensional stability and stiffness due to three cross-oriented layers
Applications
Suitable for structural and decorative uses where a strong, stable wood-based panel is required.
- Subflooring and load-bearing floor panels
- Exterior and interior sheathing in humid conditions
- Decorative interior finishes and paneling
- Diffusion-open or diffusion-closed construction systems
Timber-frame wall and roof sheathing
What to Consider When Choosing
- Check EN standards and fire classification for your project needs
- Use OSB/3 where stiffness and load capacity are needed, especially in timber-frame structures
- Account for partial wet resistance but not as a fully waterproof product
- Consider fastener type and spacing since the panel holds fixings well, even near edges
Confirm required thickness and size — this panel is 22 mm and 2500 × 1250 mm
Specifications
- Thickness: 22 mm
- Panel dimensions: 2500 × 1250 mm
- Package measurements: 250.00 × 125.00 × 2.20 cm
- Total weight: 41.31 kg
- Standards: EN 300 (type OSB 3); EN 13501-1: class D-s1, d0; EN 13986:2004+A1:2015
- Formaldehyde class: E1 (EN 120)
Type: OSB/3 (three-layer panel with outer layers longitudinal, inner layer crosswise)
Why Buy from SityPro
- Detailed specification and standards listed for confident selection
- Delivery available to Estonia and Finland
- Packaged dimensions and weight provided to simplify logistics and handling
- Customer support for product application and selection guidance
Easy to buy online with clear product features and price information
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the OSB board 22 mm 2500 x 1250 mm
What is OSB BOARD 22mm 2500X1250 and where is it used?
OSB BOARD 22mm 2500X1250 is a three-layer OSB/3 panel with cross-oriented strands providing dimensional stability and high stiffness. It is used for timber-frame structures, subflooring, sheathing and decorative applications indoors and outdoors when protected from prolonged direct moisture exposure.
What standards and formaldehyde/fire classes apply to OSB BOARD 22mm 2500X1250?
The board complies with EN 300 (type OSB 3) and EN 13986:2004+A1:2015; fire classification EN 13501-1: D-s1, d0 and formaldehyde class E1 (EN 120). These indicate suitability for construction use and low formaldehyde emissions.
Is OSB BOARD 22mm 2500X1250 suitable for flooring on joists?
Yes, the 22 mm thickness and OSB/3 rating provide sufficient stiffness and bending strength for boarding over joists when the joist spacing follows structural load calculations. Use appropriate floor finishes like parquet, laminate or an additional top layer per installation guidelines.
Can this board be used for exterior cladding?
The OSB BOARD 22mm 2500X1250 can be used for exterior sheathing but must be protected from direct, prolonged moisture with cladding, wind barrier and appropriate finishes. Without proper moisture protection, long-term exposure to rain will reduce service life.
What are the dimensions of OSB BOARD 22mm 2500X1250 and how much allowance for waste should I plan?
Dimensions are in the name: 2500 x 1250 mm with 22 mm thickness. Plan a cutting/waste allowance of about 5–10%, increasing to 10–15% for complex layouts.
What is the surface of OSB BOARD 22mm 2500X1250 — sanded or textured?
The board has a uniform wood-textured surface typical of OSB/3. For decorative use the surface can be sanded and finished with varnish, paint or veneer according to the desired look.
Can I cut and fix OSB BOARD 22mm 2500X1250 with common woodworking tools?
Yes — the board can be cut with circular, jigsaw or handsaws and fixed with wood screws or nails. Use sharp blades and consider edge protection if moisture exposure is a concern to prevent splintering.
How does OSB/3 on this board differ from other OSB types?
OSB/3 is a structural, moisture-resistant grade suitable for interior use and protected exterior applications. It offers higher mechanical strength and moisture resistance than OSB/1 or OSB/2 for load-bearing structures.
Is this board suitable for furniture and decorative panels indoors?
Yes — with a uniform wood surface and E1 formaldehyde rating, OSB BOARD 22mm 2500X1250 is suitable for furniture and decorative interior panels when edges are finished and the surface is appropriately treated.
What bending strength and stiffness does this board provide in frame structures?
As an OSB/3 22 mm panel, it provides high stiffness and good bending strength due to cross-oriented layers. For exact strength values follow design standards and structural calculations based on your framing requirements.
Where to buy OSB board 22 mm 2500 x 1250 mm?
You can buy OSB board 22 mm 2500 x 1250 mm in our online store for 31.37€. Category: OSB boards.
What is the price of OSB board 22 mm 2500 x 1250 mm?
The current price of OSB board 22 mm 2500 x 1250 mm is 31.37€. Brand: Tootja puudub.
OSB board 22 mm 2500 x 1250 mm — specifications and description
Model: 000-336727ASP. Category: OSB boards. Brand: Tootja puudub. Price: 31.37€.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro
