STEEL ANCHOR SAM 5E ÜHEKORDNE NURGAGA/ 4tk
The photographs are for illustrative purposes only.
Get AI analytics on product STEEL ANCHOR
SAM 5E ÜHEKORDNE NURGAGA/ 4tk:
SAM 5E ÜHEKORDNE NURGAGA/ 4tk:
In stock
Product Code: 000-494306ASP
Fuel surcharge — 2.5%
The surcharge covers part of SityPro’s transport and logistics costs. Delivery to parcel lockers is charged without any additional markup — according to the carrier’s rate.
The surcharge covers part of SityPro’s transport and logistics costs. Delivery to parcel lockers is charged without any additional markup — according to the carrier’s rate.
SPECIFICATION STEEL ANCHOR SAM 5E ÜHEKORDNE NURGAGA/ 4tk price 3.65€ ESSVE
ESSVE SAM metallekspander on mõeldud kinnitamiseks igat tüüpi plaatmaterjalidesse, nt kips-, puitlaast- ja puitkiudplaadid, ka plast-, plekk- ja laminaatplaadid.
Kirjeldus
SAM metallekspander on terasest valmistatud kinnituselement, mille alushülss on kruvi jaoks sisekeermetega. SAM metallekspandri monteerimisel tuleb kasutada montaažitööriista SAMMY või tange SAM (vt Montaažitarvikud). Metallekspander tõmmatakse kokku ja selle keskosa ekspandeerub, mille juures neli jalga painduvad tagasi. Kandevõime on kõrge, kuna jalad jagavad rõhu suurel pinnal ära. Montaažitööriistad tagavad, et saadakse korrektne ekspandeerumine. Metallekspandriga SAM saab püsiva keermestatud kinnituspunkti. Ekspander on konstrueeritud nii, et püsib korralikult paigal isegi siis, kui kruvi on välja võetud. Ekspandrit on meetriliselt keermestatud kruvidele mõõtudega 4, 5 ja 6 mm ning sellel on Philipsi ristpea Ph2.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the STEEL ANCHOR SAM 5E ÜHEKORDNE NURGAGA/ 4tk
What is STEEL ANCHOR SAM 5E ÜHEKORDNE NURGAGA/ 4tk and what is it used for?
STEEL ANCHOR SAM 5E ÜHEKORDNE NURGAGA/ 4tk is an ESSVE steel metal expander designed for fixing into panel materials such as plasterboard, chipboard, MDF, plastic, sheet metal and laminate. It creates a permanent internally threaded fixing point and remains in place even if the screw is removed.
Which materials can the STEEL ANCHOR SAM 5E be installed into?
The anchor is suitable for panel materials such as plasterboard, chipboard, MDF and fibreboard, as well as plastic, sheet metal and laminate panels. It is not intended for installation into empty cavity areas without a panel surface.
What tools are required to install the SAM 5E anchor?
Installation requires the ESSVE SAMMY installation tool or SAM pliers to ensure correct pulling and expansion of the centre section. Without these tools the expander may not expand fully for a secure fixing.
How does the SAM 5E expansion mechanism work and why does it hold?
During installation the centre section is pulled together and four legs bend back, causing the anchor to expand and distribute load over a large area. This design gives high load capacity and keeps the anchor in place even if the screw is removed.
Does the SAM 5E support repeated screw removal/installation?
The SAM 5E creates a permanent internally threaded fixing point and remains in place when the screw is removed. The mechanical expansion is single-use, so the expander itself is not designed for re-expanding in the same hole.
What screw sizes/diameters are compatible with the SAM 5E?
The description states the anchor has an internal sleeve with internal thread for a screw, but specific screw diameters are not listed. Choose a screw matching the internal thread shown on the product packaging or ESSVE technical sheet for model A161073SP.
Is the SAM 5E suitable for fixing shelves, light fittings or plumbing fixtures to plasterboard?
The SAM 5E is suitable for point fixings in plasterboard and similar panels, so it works for light to medium loads such as shelves and small light fittings. For heavy items (large cabinets, heavy sanitary fixtures) verify load capacity and use anchors rated for higher loads.
Who is the manufacturer and what is the product article number to find technical documentation?
The manufacturer is ESSVE and the product identifiers are model A161073SP and SKU 000-494306ASP. Use these references to obtain ESSVE technical datasheets or installation instructions.
How many pieces are in the pack — is it 4 pcs?
The product name indicates a pack of 4: STEEL ANCHOR SAM 5E ÜHEKORDNE NURGAGA/ 4tk. Confirm the exact quantity on the product packaging or product details.
How does the SAM 5E differ from other ESSVE metal anchors?
The SAM 5E features a steel expander with four bending legs and an internal thread, delivering high load capacity in panel materials; it requires the SAMMY tool or SAM pliers for correct expansion. Other ESSVE anchors differ by expander shape, thread size and suitability for different substrates.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro