STEEL ANCHOR SAM 5E ÜHEKORDNE KONKSUGA/ 4tk
SPECIFICATION STEEL ANCHOR SAM 5E ÜHEKORDNE KONKSUGA/ 4tk price 3.93€ ESSVE
ESSVE SAM metallekspander on mõeldud kinnitamiseks igat tüüpi plaatmaterjalidesse, nt kips-, puitlaast- ja puitkiudplaadid, ka plast-, plekk- ja laminaatplaadid.
Kirjeldus
SAM metallekspander on terasest valmistatud kinnituselement, mille alushülss on kruvi jaoks sisekeermetega. SAM metallekspandri monteerimisel tuleb kasutada montaažitööriista SAMMY või tange SAM (vt Montaažitarvikud). Metallekspander tõmmatakse kokku ja selle keskosa ekspandeerub, mille juures neli jalga painduvad tagasi. Kandevõime on kõrge, kuna jalad jagavad rõhu suurel pinnal ära. Montaažitööriistad tagavad, et saadakse korrektne ekspandeerumine. Metallekspandriga SAM saab püsiva keermestatud kinnituspunkti. Ekspander on konstrueeritud nii, et püsib korralikult paigal isegi siis, kui kruvi on välja võetud. Ekspandrit on meetriliselt keermestatud kruvidele mõõtudega 4, 5 ja 6 mm ning sellel on Philipsi ristpea Ph2.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the STEEL ANCHOR SAM 5E ÜHEKORDNE KONKSUGA/ 4tk
What is STEEL ANCHOR SAM 5E ÜHEKORDNE KONKSUGA/ 4tk?
STEEL ANCHOR SAM 5E ÜHEKORDNE KONKSUGA/ 4tk is an ESSVE steel metallexpander designed for fixing into panel materials like plasterboard, chipboard, MDF, plastic, sheet metal and laminate. When installed with the SAMMY tool or SAM pliers the centre expands, four legs bend back and create a durable threaded fixing point.
Which materials can the STEEL ANCHOR SAM 5E be used in?
The anchor is suitable for all panel-type materials: plasterboard, chipboard, MDF, plus plastic, sheet metal and laminate panels. Ensure the panel thickness allows the four legs to fully expand and engage.
Do I need a special tool to install the STEEL ANCHOR SAM 5E and which one?
Yes — use the SAMMY installation tool or SAM pliers for correct expansion. These tools pull the expander properly so the centre expands evenly and the four legs bend back for a secure fixing.
Can the screw be removed from the STEEL ANCHOR SAM 5E and will the anchor stay in place?
Yes — the expander is designed to remain firmly in place even if the screw is removed, leaving a permanent threaded fixing point ready for reuse.
What is the load capacity of the STEEL ANCHOR SAM 5E and how is it achieved?
The anchor offers high load capacity because its four legs spread the load over a large surface when expanded. Achieving rated performance requires correct expansion using the SAMMY tool or SAM pliers.
Is the STEEL ANCHOR SAM 5E suitable for fixing heavy items like shelves or radiators?
It can be used in panel materials, but fastening heavy items depends on the panel thickness and strength. For heavy loads, check the substrate and use multiple anchors or specialist fixings as required.
What are the model and SKU details for this anchor?
The model is A161071SP and the SKU is 000-494304ASP. Manufacturer: ESSVE; category: Fastening and lifting equipment.
What material is the SAM 5E anchor made of and how does it resist corrosion?
The anchor is made of steel, providing strong fixation. Corrosion resistance depends on operating conditions; for aggressive or damp environments consider corrosion-protected variants from ESSVE.
How do I prepare the hole and install SAM 5E anchors in plasterboard correctly?
Drill the hole to the recommended diameter for model A161071SP (see ESSVE guidelines), insert the expander, then use the SAMMY tool or SAM pliers to pull it together and expand. Ensure the legs have fully deployed and press firmly against the board’s rear surface.
How does the single-use STEEL ANCHOR SAM 5E differ from other anchor types?
SAM 5E is a steel single-use expander with internal threads and four legs for panel materials. Compared with plastic plugs it provides higher load capacity and stays in place when the screw is removed, but it requires the SAMMY tool or SAM pliers for correct expansion.
How many pieces are in the pack and does it include a hook?
The product name includes '/ 4tk', meaning four pieces per pack. 'ÜHEKORDNE KONKSUGA' indicates it is a single-use type with a hook feature or suitable for hook fittings.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro