ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x50 PP/TX25 ZN/C1/ 20tk
DESCRIPTION ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x50 PP/TX25 ZN/C1/ 20tk price 3.46€ ESSVE
Kruvi on valmistatud karastatud ja noolutatud terasest ning sel on sisetingimustesse sobiv läikivaks tsingitud pinnatöötlus. TX-pesa/-otsak. Kruvil on patenditud kujuga ots, mis tagab kiire kinnitumise puidu sisse. Ka kruvipea kuju on patenditud ning minimeerib tänu sellele kildude tekkimist ja tagab kena lõpptulemuse. Üle 70 mm pikkustel ja pikematel kruvidel on tavalise puidukeerme järel täiendav freeskeere, mis lihtsustab pikemate ja jämedamate kruvide kinnitamist. Kruvipeale on lisatud lõikesoon, mis lõikab puidukiud läbi, süvistab kruvi ja kindlustab sileda, pindudeta pinna. Kruvipea sobib lisaks suurepäraselt süvistatud ehitusrautiste paigaldamiseks, sest sel puuduvad väljaulatuvad ribid. Kruvi täidab CE-märgise nõudeid vastavalt standardile EN 14592.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x50 PP/TX25 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x50 PP/TX25 ZN/C1/ 20tk?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x50 PP/TX25 ZN/C1/ 20tk is a hardened, pointed wood screw with a glossy zinc finish for internal use, TX25 drive and patented tip/head design; compliant with EN 14592 (CE).
What types of wood is this screw suitable for?
The ESSDRIVE 5,0x50 is suitable for both soft and hard indoor woods; its patented tip quickly penetrates wood fibres and the cutting groove on the head reduces splitting for a smooth finish.
Can these screws be used outdoors?
No, the glossy zinc finish is intended for internal use; outdoor applications require more corrosion-resistant coatings than provided here.
What are the size and thread of the ESSDRIVE 5,0x50?
This model is 5.0 mm diameter and 50 mm long with a wood thread; the pack contains 20 screws and uses a TX25 drive.
Do I need to pre-drill before driving these screws?
Due to the patented tip and cutting groove, pre-drilling is generally not required for most woods, especially softwood. For very hard or laminated woods, countersinking or a pilot hole is recommended.
What tool is needed to drive these screws — is a TX25 bit suitable?
Yes, the screw has a TX drive so a TX25 bit fits. For ease and speed use a cordless driver with torque control.
Why does the screw have no ribs on the head and what is the cutting groove for?
The absence of protruding ribs allows neat countersinking and fitting of recessed hardware; the cutting groove slices wood fibres to ensure a smooth, blemish-free surface.
Is this screw suitable for installing construction fittings (angles, plates)?
Yes, the ESSDRIVE head shape is suitable for countersunk construction fittings; lacking protruding ribs ensures plates and brackets sit flush.
What does the ZN/C1 marking mean on this model?
ZN denotes zinc plating suitable for indoor use; C1 indicates a low corrosion class, so these screws are not intended for aggressive or outdoor environments.
Does this screw meet European safety standards?
Yes, the product description states the screw meets CE requirements according to EN 14592, applicable to fasteners for timber structures.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro