ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x40 PP/TX25 ZN/C1/ 20tk
SPECIFICATION ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x40 PP/TX25 ZN/C1/ 20tk price 3.27€ ESSVE
Kruvi on valmistatud karastatud ja noolutatud terasest ning sel on sisetingimustesse sobiv läikivaks tsingitud pinnatöötlus. TX-pesa/-otsak. Kruvil on patenditud kujuga ots, mis tagab kiire kinnitumise puidu sisse. Ka kruvipea kuju on patenditud ning minimeerib tänu sellele kildude tekkimist ja tagab kena lõpptulemuse. Üle 70 mm pikkustel ja pikematel kruvidel on tavalise puidukeerme järel täiendav freeskeere, mis lihtsustab pikemate ja jämedamate kruvide kinnitamist. Kruvipeale on lisatud lõikesoon, mis lõikab puidukiud läbi, süvistab kruvi ja kindlustab sileda, pindudeta pinna. Kruvipea sobib lisaks suurepäraselt süvistatud ehitusrautiste paigaldamiseks, sest sel puuduvad väljaulatuvad ribid. Kruvi täidab CE-märgise nõudeid vastavalt standardile EN 14592.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x40 PP/TX25 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x40 PP/TX25 ZN/C1/ 20tk?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x40 PP/TX25 ZN/C1/ 20tk is a hardened, pointed wood screw with glossy zinc coating for interior use, TX drive and patented tip and head design; sold in a pack of 20, compliant with EN 14592 and designed for neat countersinking into timber.
What jobs is the ESSDRIVE 5,0x40 suitable for?
The ESSDRIVE 5,0x40 is for interior timber fixing: joining boards, frames, furniture and fixing building hardware. Its patented pointed tip allows fast penetration into wood, so pre-drilling is usually unnecessary.
Is the ZN/C1 zinc coating suitable for wet rooms?
ZN/C1 is a glossy zinc coating intended for interior use. For wet rooms or exterior use choose a more corrosion‑resistant screw rather than the ESSDRIVE 5,0x40 with ZN/C1 coating.
What head does the screw have and do I need a special bit?
The ESSDRIVE 5,0x40 has a PP (countersunk) head with a TX drive; you need a TX25 bit for installation to ensure secure torque transfer and reduce cam‑out.
Do I need to pre‑drill for a 5.0x40 screw?
Pre‑drilling is not required in most soft and medium‑density woods due to the patented pointed tip. For very hard timber or laminated materials pre‑drilling a pilot hole is recommended.
Is this screw suitable for countersunk fixing of building hardware?
Yes. The ESSDRIVE 5,0x40 has a patented countersunk head without protruding ribs, making it suitable for flush, countersunk fixing of building hardware.
What is different about lengths over 70 mm in this series?
For ESSDRIVE screws over 70 mm, an additional milling thread follows the normal wood thread, which makes driving longer and thicker screws easier and reduces installation effort.
Does this screw meet European safety standards?
Yes, the ESSDRIVE 5,0x40 PP/TX25 ZN/C1/ 20tk meets CE requirements according to standard EN 14592 for timber fasteners.
What material is the screw made of and how does that affect strength?
The screw is made of hardened, sharpened steel; the hardening and geometry provide high strength and reliable holding in timber for typical internal fixings.
How many screws are in the pack and how are they packaged?
The ESSDRIVE 5,0x40 PP/TX25 ZN/C1/ is supplied in a pack of 20 screws; the packaging is compact for convenient storage and transport.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro