ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x30 ÜP/TX25 ZN/C1/ 20tk
DESCRIPTION ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x30 ÜP/TX25 ZN/C1/ 20tk price 2.90€ ESSVE
Kumerpeaga puidukruvid ESSDRIVE sobivad enamikuks paigaldustöödeks puitlaastplaatide, puidu, plasti, kinnitusdetailide, tüüblite jmt puhul.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x30 ÜP/TX25 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x30 ÜP/TX25 ZN/C1/ 20tk and what is it used for?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x30 ÜP/TX25 ZN/C1/ 20tk is an ESSVE domed-head wood screw, 5.0×30 mm with TX25 drive and ZN/C1 zinc coating; used for fixing particleboard, wood, plastic, fittings and plugs.
What thread do these screws have and is pre-drilling necessary?
ESSDRIVE screws feature a standard wood-design thread; pre-drilling is recommended for hard wood species and particleboard to prevent splitting and ensure accurate seating.
Is this screw suitable for furniture joints and hinge fixing?
Yes: the ESSDRIVE 5.0×30 ÜP/TX25 is suitable for furniture joints and hinge fixings provided the 30 mm length matches material thickness and loads; choose a longer screw for thicker components.
What is the material/coating of these screws — are they suitable for humid environments?
The screws have a ZN/C1 zinc coating providing basic corrosion protection; for continuously humid indoor environments or outdoor use, opt for stainless steel or specially coated moisture-resistant screws.
What are the dimensions of the screws and how many pieces are in the pack?
Dimensions are 5.0 mm diameter × 30 mm length; the pack contains 20 pieces. Model A160963SP, SKU 000-493296ASP, manufacturer ESSVE.
What head type and driver bit is required?
These screws have a domed/head shape with a TX25 Torx drive — use a TX25 bit in a screwdriver or power drill.
Are these screws suitable for fastening fittings to plastic?
Yes, the ESSDRIVE 5.0×30 can be used for plastic fastenings if the plastic thickness and density can hold the thread; for soft plastics consider washers or plugs.
How do these screws differ from other ESSDRIVE models in length or coating?
This ESSDRIVE is 5.0×30 mm with ZN/C1 zinc coating; other ESSDRIVE models vary in length (e.g. 35–50 mm) and coatings such as stainless steel or special corrosion-resistant finishes for different uses.
Are these screws suitable for fixing plugs in drywall?
The ESSDRIVE 5.0×30 wood screws are mainly intended for wood and particleboard; for drywall use specialist drywall anchors or screws specifically designed for plasterboard.
Can these screws be used with power tools and what torque settings are recommended?
Yes, use a TX25 bit in a power driver. Start with a low torque setting and increase until the head seats cleanly without stripping the bit or damaging the material.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro