ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x25 ÜP/TX25 ZN/C1/ 20tk
DESCRIPTION ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x25 ÜP/TX25 ZN/C1/ 20tk price 2.72€ ESSVE
Kumerpeaga puidukruvid ESSDRIVE sobivad enamikuks paigaldustöödeks puitlaastplaatide, puidu, plasti, kinnitusdetailide, tüüblite jmt puhul.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x25 ÜP/TX25 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x25 ÜP/TX25 ZN/C1/ 20tk and what is it used for?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 5,0x25 ÜP/TX25 ZN/C1/ 20tk is a domed-head ESSDRIVE wood screw with TX25 drive and ZN/C1 coating, sold in a pack of 20; it’s designed for fixing chipboard, wood, plastic, fittings and plugs in most interior installation tasks.
What are the diameter and length of these screws?
Marked 5,0x25 indicates a 5.0 mm diameter and 25 mm length, suitable for fastening thinner panels and components to wooden substrates without protruding through the reverse side.
What is the screw coating and why does it matter?
Coating ZN/C1 is a zinc passive finish that provides corrosion protection for interior use and improves resistance to rust under normal operating conditions.
Is a TX25 bit suitable for ESSDRIVE 5,0x25 screws?
Yes — the screws have a TX25 Torx drive (marked ÜP/TX25), so use a TX25 bit or driver for optimal fastening and to minimise cam‑out.
Can these screws be used with wall plugs?
Yes, the product description states suitability for plugs; the 5.0 mm diameter is commonly compatible with matching plastic plugs for interior fixings.
Are these screws suitable for chipboard furniture (DSP)?
Yes, the description states ESSDRIVE domed-head screws suit chipboard; 5x25 mm is suitable for furniture fixings, and pre‑drilling can be used to avoid splitting where necessary.
Are these screws suitable for outdoor use or wet rooms?
The ZN/C1 coating gives basic protection, but the description targets general installations—choose more corrosion‑resistant or specialised coated screws for outdoor or high‑moisture environments.
What head type do these screws have and how do they look when installed?
Described as 'kumerpeaga' — a domed/rounded (pan) head; when installed the head remains visible with a neat rounded profile, commonly used where a finished appearance is required.
How many pieces are in the pack and what are the model/SKU details?
The pack contains 20 pieces; model A160962SP, SKU 000-493295ASP, manufacturer ESSVE, category 'Fastening and lifting equipment'.
Can these screws be used to fasten plastic to a wooden frame?
Yes, the ESSDRIVE screws are stated as suitable for plastic and wood; 5x25 mm gives adequate holding for fastening plastic to wood when material thicknesses are compatible.
How does ESSDRIVE 5,0x25 differ from other ESSVE models?
This model features a domed head, 5.0×25 mm size, TX25 drive and ZN/C1 coating; other ESSVE screws vary by length, diameter, head type or corrosion‑resistant coating.
Do you need to pre‑drill for a 5x25 screw in chipboard or wood?
Pre‑drilling or a pilot hole is sometimes recommended in chipboard to prevent splitting; in soft wood a 5x25 screw usually does not require pre‑drilling, though it depends on material density.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro