ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 ÜP/TX20 ZN/C1/ 20tk
SPECIFICATION ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 ÜP/TX20 ZN/C1/ 20tk price 2.72€ ESSVE
Kumerpeaga puidukruvid ESSDRIVE sobivad enamikuks paigaldustöödeks puitlaastplaatide, puidu, plasti, kinnitusdetailide, tüüblite jmt puhul.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 ÜP/TX20 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 ÜP/TX20 ZN/C1/ 20tk and what is it used for?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 ÜP/TX20 ZN/C1/ 20tk is a curved-head wood screw by ESSVE, 4.0 mm diameter, 30 mm length, TX20 drive and ZN/C1 zinc finish; used for fixing chipboard, timber, plastic, fittings and anchors in general assembly tasks.
Is this screw suitable for chipboard and laminated boards?
Yes, the ESSDRIVE 4.0x30 is suitable for chipboard and laminated panels: the curved head gives a snug fit without splitting, and the 4.0×30 mm size is appropriate for medium-thickness fixings.
Can these screws be used for plastic and composites?
Yes, the ESSDRIVE 4.0x30 can be used in plastics and some composites; for soft materials use a pilot hole and low driving speed to avoid cracking or deformation.
What type of screwdriver is needed for ESSDRIVE 4.0x30 ÜP/TX20?
You need a TX20 (Torx 20) bit or screwdriver; using the correct TX20 bit reduces cam-out and ensures proper driving.
How corrosion-resistant is the ZN/C1 zinc finish on these screws?
The ZN/C1 zinc finish provides basic corrosion protection suitable for indoor and dry environments; for exterior or high-humidity use choose a more durable coating or stainless alternative.
How many pieces are in the pack and is the packaging suitable for storage?
The pack contains 20 pieces (20tk) of ESSDRIVE 4.0x30; the plastic box keeps screws organised and is suitable for on-site storage.
Are these screws suitable for attaching metal brackets to wood?
Yes, the ESSDRIVE 4.0x30 is suitable for fixing lightweight metal brackets to wood and chipboard. For heavier loads use longer or thicker screws.
Is pre-drilling normally required for these screws?
Pre-drilling is recommended for hard wood species and chipboard to prevent splitting. In soft wood, a 4.0 mm screw usually does not require a pilot hole.
How does the ESSDRIVE 4.0x30 differ from longer or thicker ESSDRIVE models?
The ESSDRIVE 4.0x30 is compact at 30 mm length and 4.0 mm diameter, ideal for medium and thin parts. Longer or thicker models provide greater holding power for thicker or load-bearing joints.
Is this screw suitable for DIY furniture assembly?
Yes, the ESSDRIVE 4.0x30 is commonly used for furniture assembly: 4.0×30 mm is a common size for fixing doors, hinges and fittings to chipboard and wood in domestic projects.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro