ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 PP/TX20 ZN/C1/ 20tk
DESCRIPTION ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 PP/TX20 ZN/C1/ 20tk price 2.72€ ESSVE
Puidukruvi ESSDRIVE sobib enamikuks paigaldustöödeks puitlaastplaatide, puidu, plasti, ehitusrautiste, tüüblite jne puhul.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 PP/TX20 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 PP/TX20 ZN/C1/ 20tk?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x30 PP/TX20 ZN/C1/ 20tk is an ESSDRIVE wood screw, 4.0 mm diameter and 30 mm length, with a TX20 drive and PP (pan) head, zinc ZN/C1 coating; pack of 20, designed for fastening wood, particle board, plastic and dowels.
What materials is this screw suitable for?
The ESSDRIVE 4.0x30 screw is suitable for wood, particle board, plastic, and for use with dowels and light metal fixings.
What is the head type and drive of the screw?
This model has a PP (pan) head and a TX20 Torx drive, providing good torque transfer and reduced cam-out.
Does the screw have corrosion protection?
Yes, the screw has a ZN/C1 zinc coating, providing basic corrosion protection for interior and dry conditions.
Is this screw suitable for furniture assembly and casework?
Yes, the 4.0×30 mm size fits many furniture fixings in particle board and wood; the TX20 drive allows neat fastening with minimal surface damage.
How many pieces are in the pack and what is the model/SKU?
The pack contains 20 pieces; model A160997SP, SKU 000-493220ASP, manufacturer ESSVE.
Is pilot drilling required for this length/diameter?
In soft wood pilot drilling is usually not necessary for a 4.0×30 mm screw; for hardwoods or dense particle board, a pilot hole of similar diameter is recommended to prevent splitting.
Is the screw compatible with screwdrivers and what bit is needed?
Yes, it is compatible with electric screwdrivers and drills; use a Torx TX20 bit for secure engagement with the drive.
Is this screw suitable for outdoor use and wet rooms?
The screw has a ZN/C1 zinc coating for basic protection, but for prolonged outdoor exposure or continually wet environments, choose stainless or higher corrosion-resistant fasteners.
How does this ESSDRIVE 4.0x30 model differ from other sizes in the range?
This model specifically is 4.0 mm diameter and 30 mm long with a PP head and TX20 drive; other models vary by length/diameter, head type or coating, affecting use-case and holding strength.
Can these screws be used with dowels and which type?
Yes, they can be used with plastic dowels of appropriate size for fixing into masonry or hollow bases; choose a dowel matched to the screw diameter and substrate thickness.
Are these screws suitable for fixing plastic panels?
Yes, the ESSDRIVE 4.0×30 is suitable for fixing plastic panels to a wooden substrate or via dowels; 30 mm length is sufficient for thin to medium panels when the substrate is solid.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro