ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x20 ÜP/TX20 ZN/C1/ 20tk
SPECIFICATION ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x20 ÜP/TX20 ZN/C1/ 20tk price 2.53€ ESSVE
Kumerpeaga puidukruvid ESSDRIVE sobivad enamikuks paigaldustöödeks puitlaastplaatide, puidu, plasti, kinnitusdetailide, tüüblite jmt puhul.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x20 ÜP/TX20 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x20 ÜP/TX20 ZN/C1/ 20tk and what is it used for?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 4,0x20 ÜP/TX20 ZN/C1/ 20tk is a domed-head wood screw for general fastening in chipboard, wood, plastic, fixings and dowels. Size: 4.0×20 mm, TX20 drive, zinc ZN/C1 coating, pack of 20 screws.
Is this screw suitable for fastening furniture parts to chipboard (DSP)?
Yes. The ESSDRIVE 4.0×20 mm screw is intended for chipboard and thin wood components; the 20 mm length is appropriate for thin furniture parts without penetrating the reverse side.
What screwdriver type is needed for ESSDRIVE 4.0×20?
A TORX TX20 bit is required. Use a TX20 bit in a driver or manual screwdriver for secure engagement and to minimise cam-out.
What coating do the screws have and what does ZN/C1 mean?
ZN/C1 is a zinc coating providing basic corrosion protection for indoor and dry conditions. For exterior use or humid environments choose a more durable coating.
How many pieces are in the pack and are other quantities available?
The pack contains 20 screws (20tk). The provided product data does not list other pack sizes.
Can these screws be used for fastening into plastic?
Yes. The product description states the ESSDRIVE screws suit plastic; 4.0 mm diameter and TX20 drive give reliable engagement in soft materials when screwing carefully.
Are these screws suitable for fixing dowels/dowels in a wall?
The description lists compatibility with dowels: ESSDRIVE 4.0×20 can be used with dowel fixings, but confirm the dowel and substrate require sufficient anchor length and diameter separately.
How does ESSDRIVE 4.0×20 differ from longer screws?
The 4.0×20 version is short (20 mm) suited for thin materials and fittings. Longer screws provide greater holding power in thicker parts and load-bearing joints—select length by combined thickness of components.
How should I pre-drill for these screws in hard wood?
For hard wood, pre-drill a pilot hole about 2.5–3.0 mm to prevent splitting. Then drive the screw with a TX20 bit and moderate torque.
Are these screws suitable for outdoor work and wet rooms?
The ZN/C1 zinc coating gives only basic protection; for prolonged outdoor use or permanently wet rooms choose screws with more robust anti-corrosion treatment. Only ZN/C1 is listed in the product data.
What are the dimensions and specs for model A160957SP (SKU 000-493280ASP)?
Model A160957SP (SKU 000-493280ASP) is ESSVE ESSDRIVE 4.0×20 with domed head, 4.0 mm diameter, 20 mm length, TORX TX20 drive, zinc ZN/C1 coating, pack of 20.
Is this screw suitable for a thin furniture board without splitting?
Yes. The 4.0 mm diameter and 20 mm length reduce splitting risk in thin boards, especially if you pre-drill a pilot hole and drive the screw gently.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro