ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,5x30 PP/TX10 ZN/C1/ 20tk
DESCRIPTION ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,5x30 PP/TX10 ZN/C1/ 20tk price 2.72€ ESSVE
Puidukruvi ESSDRIVE sobib enamikuks paigaldustöödeks puitlaastplaatide, puidu, plasti, ehitusrautiste, tüüblite jne puhul.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,5x30 PP/TX10 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,5x30 PP/TX10 ZN/C1/ 20tk and what is it used for?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,5x30 PP/TX10 ZN/C1/ 20tk is a 3.5×30 mm wood screw with a PP head, TX10 drive and zinc coating (ZN/C1). It is suitable for fastening chipboard, wood, plastic, construction fittings and for fixing dowels.
Is this screw suitable for chipboard and furniture?
Yes, the ESSDRIVE 3.5×30 is specified for chipboard (puitlaastplaatide) and furniture applications; the 30 mm length is suitable for thinner panels and frame joints.
What head does the screw have and what TX bit is required?
The screw has a PP head (semi countersunk) and a Torx drive; use a TX10 bit for proper installation without cam-out.
What coating does the screw have and how corrosion-resistant is it?
The screw has a zinc coating ZN/C1, providing basic corrosion protection for dry indoor environments; for outdoor or humid conditions choose a more robust coating.
Is this screw suitable for plastic and fitting hardware?
Yes. The product states ESSDRIVE is suitable for plastic and construction fittings; the 3.5×30 mm size works for hinges, rails and accessory fittings.
How many pieces are in the pack and is it convenient for furniture repair?
The pack is marked 20tk — 20 pieces. That's usually enough for small furniture repairs and a few fixing points; larger jobs will require additional packs.
What is the model/sku and manufacturer of this screw?
Model is A160991SP, SKU 000-493224ASP and the manufacturer is ESSVE. Category: fastenings and lifting equipment (Крепежные, подъемные средства).
Can these screws be used with dowels and what for?
Yes—description states suitability for dowel fixing (tüüblite). The 3.5×30 mm size is appropriate for light fixings with the correct dowel in hollow or solid walls.
How does ESSDRIVE 3.5×30 differ from other ESSVE screw sizes?
The difference is dimensions: 3.5×30 is for thinner panels and light fixings, whereas thicker or longer ESSVE models are intended for heavier joints and load-bearing applications.
Is pre-drilling required for wood and chipboard?
Often 3.5×30 ESSDRIVE does not require pre-drilling in soft woods and chipboard, but for hardwoods or near edges pre-drilling or countersinking is recommended to prevent splitting.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro