ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,0x20 PP/TX10 ZN/C1/ 20tk
SPECIFICATION ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,0x20 PP/TX10 ZN/C1/ 20tk price 2.43€ ESSVE
Puidukruvi ESSDRIVE sobib enamikuks paigaldustöödeks puitlaastplaatide, puidu, plasti, ehitusrautiste, tüüblite jne puhul.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,0x20 PP/TX10 ZN/C1/ 20tk
What is ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,0x20 PP/TX10 ZN/C1/ 20tk and what is it used for?
ШУРУП ПО ДЕРЕВУ ESSDRIVE 3,0x20 PP/TX10 ZN/C1/ 20tk is a general-purpose wood screw (3.0×20 mm) with a PP head and TX10 drive; it's suited for chipboard, wood, plastic, construction metal fittings and fixing with wall plugs.
What are the dimensions and drive type of these ESSDRIVE screws?
The ESSDRIVE screws are 3.0 mm in diameter and 20 mm long, with a PP head and TX10 (Torx) drive; the pack contains 20 pieces.
Are these screws suitable for fixing furniture made of chipboard (DSP)?
Yes, the ESSDRIVE 3.0×20 is suitable for chipboard and furniture assembly; the 20 mm length is ideal for thinner panels and fittings—use longer screws for thicker parts.
Can I use these screws for plastic and construction metal fittings?
Yes — the product description states suitability for plastic and construction metal fittings; just check that the 20 mm length provides sufficient engagement through both materials.
What is the coating of ESSDRIVE 3.0×20 — is there corrosion protection?
The ZN marking denotes a zinc coating, so these screws have basic corrosion protection suitable for indoor and mild conditions; choose specially zinc-plated or stainless options for exterior use.
What is the packaging and how many screws per box for ESSDRIVE 3.0×20?
The ESSDRIVE 3.0×20 PP/TX10 ZN/C1 comes in a pack of 20 pieces, as stated in the product name.
What screwdriver/drill compatibility is required for TX10?
These screws use a Torx TX10 drive, so use a TX10 bit or screwdriver. For fast installation, use a cordless drill/driver with adjustable torque.
How does ESSDRIVE 3.0×20 differ from other ESSDRIVE sizes?
The 3.0×20 is shorter (20 mm) and thinner (3.0 mm), ideal for thin panels and fittings. Other sizes have greater length/diameter for thicker materials or higher-load joints.
Do I need to pre-drill pilot holes for these 3.0×20 screws in chipboard or wood?
For chipboard and soft wood, pilot holes are usually not required due to the thread. For hardwood or precise locations, a slightly smaller pilot hole is recommended to prevent splitting.
Are these screws suitable for fixing with wall plugs/dowels in a wall?
The product states suitability for use with wall plugs, but the 20 mm length may be too short for wall fixings that require passing through finishes; choose a length that ensures sufficient engagement in the plug for wall installations.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro