ШУРУП ПО ДЕРЕВУ 8x58 INDU-PROG TX30/ZN/C1/ 8tk
SPECIFICATION ШУРУП ПО ДЕРЕВУ 8x58 INDU-PROG TX30/ZN/C1/ 8tk price 5.33€ ESSVE
ESSVE Indu-Prog puidukruvi on mõeldud Indu-Prog lengihülsi monteerimiseks puitkarkassi. Soovitatakse raskemateks ja ka klassifitseeritud montaažideks.
Description provided by sitypro.com
Similar products in stock
Dear visitor, please be aware that this item is temporarily out of stock.
We recommend considering other products:
We recommend considering other products:
Or you can choose other products in the category: Screws
Related Products
Also looking for
Frequently asked questions about the ШУРУП ПО ДЕРЕВУ 8x58 INDU-PROG TX30/ZN/C1/ 8tk
ШУРУП ПО ДЕРЕВУ 8x58 INDU-PROG TX30/ZN/C1/ 8tk — what is it and what is it used for?
ШУРУП ПО ДЕРЕВУ 8x58 INDU-PROG TX30/ZN/C1/ 8tk is an ESSVE Indu-Prog wood screw designed to mount Indu-Prog frame sleeves into timber frames; recommended for heavier and classified installations. Use it to secure door frames, jambs and other heavy fixings into wood.
What are the dimensions and thread of the 8x58 INDU-PROG screw?
The screw is 58 mm long with an 8 mm diameter (8x58). It uses a TX30 Torx drive to allow high torque when installing Indu-Prog frame sleeves into timber.
What materials is the 8x58 INDU-PROG screw compatible with?
This screw is intended for timber frames and wooden door jambs when used with the Indu-Prog sleeve. It’s not for direct use in concrete or metal without the appropriate sleeve/anchor.
What is the screw finish/coating — what does ZN/C1 mean?
ZN indicates a zinc coating and C1 denotes a corrosion class. That finish gives corrosion protection suitable for internal or dry conditions; for wet external sites verify suitability.
Is this screw suitable for mounting a door frame with a metal frame?
The ШУРУП ПО ДЕРЕВУ 8x58 INDU-PROG is designed to attach the Indu-Prog sleeve to timber frames; for metal frames you need a different fastener or compatible sleeve. For combined frames follow the Indu-Prog manufacturer's recommendations.
How many pieces are in the pack and what is the product model/SKU?
The pack contains 8 pieces (8tk) as the name indicates. Model A161339SP, SKU 000-494662ASP, manufacturer ESSVE.
What tool is recommended to install TX30 screws?
Use a screwdriver or drill/driver with a Torx TX30 bit. Control the torque to avoid damaging the Indu-Prog sleeve or the timber frame.
How does this screw differ from a regular furniture screw?
The ШУРУП ПО ДЕРЕВУ 8x58 INDU-PROG is longer (58 mm), thicker (8 mm), uses a TX30 Torx drive and zinc finish, and is made for Indu-Prog sleeve and heavy classified fixings. Regular furniture screws are shorter and not rated for such heavy loads.
Can these screws be used outdoors?
The ZN/C1 coating gives basic corrosion protection for internal and dry conditions; for permanent outdoor or wet environments choose stainless or specially corrosion-resistant fasteners. Check corrosion class requirements for your project.
What maximum load does an Indu-Prog connection with this screw withstand?
The description states the ESSVE Indu-Prog wood screw is recommended for heavier and classified installations, but exact load capacities depend on the specific Indu-Prog sleeve and construction. Use ESSVE technical documentation and structural calculations for load values.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro