MOUNTING SCREW 4,2x13 TERAV PUIT/MET PH2/ZN/C1/20tk
DESCRIPTION MOUNTING SCREW 4,2x13 TERAV PUIT/MET PH2/ZN/C1/20tk price 2.72€ ESSVE
ESSVE terava otsaga montaažikruvi on mõeldud plaatmaterjalide montaažiks sisetingimustes puit- või teraskarkassile, max 0,4-0,9 mm.
Kirjeldus
Kruvi on valmistatud karastatud terasest, sel on fosfaaditud või läikivaks tsingitud pinnatöötlus. Kruvil on Philipsi ristpea Ph2.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the MOUNTING SCREW 4,2x13 TERAV PUIT/MET PH2/ZN/C1/20tk
What is the MOUNTING SCREW 4,2x13 TERAV PUIT/MET PH2/ZN/C1/20tk?
MOUNTING SCREW 4,2x13 TERAV PUIT/MET PH2/ZN/C1/20tk is an ESSVE sharp-point mounting screw 4.2×13 mm for fixing sheet materials indoors to wood or steel frames (steel thickness max 0.4–0.9 mm). Made of hardened steel with phosphate or bright zinc finish and a PH2 Phillips head.
What materials is this mounting screw suitable for?
The screw is suitable for fixing sheet materials (plasterboard, plywood, OSB etc.) indoors to timber or steel frames. The maximum steel profile thickness it can penetrate is 0.4–0.9 mm.
Is this screw suitable for outdoor or wet environments?
No, the MOUNTING SCREW 4.2×13 TERAV is intended for indoor use. Although it has phosphate or bright zinc plating, the specification states indoor application—use corrosion-resistant screws for wet or outdoor conditions.
What head does the screw have and which bit should be used?
The screw has a Phillips PH2 cross head; use PH2 bits or a screwdriver/drill with a PH2 tip for reliable fastening.
How many pieces are in the pack and what are the model/SKU?
The pack contains 20 pieces. Model A161089SP, SKU 000-494312ASP, manufacturer ESSVE, category 'Fastening and lifting equipment'.
Can this screw be used with a 0.5 mm thin metal profile?
Yes. The product specifies a steel thickness range of 0.4–0.9 mm, so a 0.5 mm profile is within that range and the screw is suitable for fastening to it.
What is the screw diameter and length, and what tasks is it typical for?
Diameter 4.2 mm and length 13 mm — typically used for fastening thin sheet materials (plasterboard, plywood) to a frame where a short, flush fixing is needed.
What material is the screw made of and what surface finish does it have?
The screw is made of hardened steel. Surface finish is either phosphate or bright zinc (ZN), providing corrosion protection suitable for indoor use.
How does this model differ from other ESSVE mounting screws?
This model features a sharp point and size 4.2×13 mm, optimised for fixing sheet materials to wood or steel frames 0.4–0.9 mm thick. Other ESSVE models may vary by length, diameter, surface finish or head type.
Is this screw suitable for fixing plasterboard to a wooden stud?
Yes, the MOUNTING SCREW 4.2×13 TERAV is suitable for fixing plasterboard to a wooden frame; its length and diameter provide secure holding without excessive protrusion.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro