MOUNTING SCREW 4,2X38 TERAV PUIT/MET PH2/ZN/C1/ 250
SPECIFICATION MOUNTING SCREW 4,2X38 TERAV PUIT/MET PH2/ZN/C1/ 250 price 15.15€ ESSVE
| Package dimensions | 9,00 x 18,00 x 8,00 cm |
| Gross weight | 0,790 kg |
| Net weight | 0,850 kg |
KASUTUSVALDKOND
ESSVE terava otsaga montaažikruvi on mõeldud plaatmaterjalide montaažiks sisetingimustes puit- või teraskarkassile, max 0,4-0,9 mm.
KIRJELDUS
Kruvi on valmistatud karastatud terasest, sel on fosfaaditud või läikivaks tsingitud pinnatöötlus ja see on saadaval erinevates RAL-värvides. Kruvil on Philipsi ristpea Ph2.
PAIGALDAMINE
Soovituslik pöörete arv: 400-1200 p/min. OTSAKU/PADRUNI TÜÜP: PH2
PEA DIAMEETER: 11
VÄLISDIAMEETER (MM): 4.2
PIKKUS (MM): 38
KEERME PIKKUS (MM): 38
SOOVITUSLIKUD PÖÖRDED (P/MIN): 400-1200
PINNATÖÖTLUS: Tsink pinnakattega
SERTIFIKAADID: CE
KASUTUSKESKKOND: Sisetingimus
KORROSIOONIKLASS: C1
PÕHIMATERJALID: Teras
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the MOUNTING SCREW 4,2X38 TERAV PUIT/MET PH2/ZN/C1/ 250
What is the MOUNTING SCREW 4,2X38 TERAV PUIT/MET PH2/ZN/C1/ 250?
MOUNTING SCREW 4,2X38 TERAV PUIT/MET PH2/ZN/C1/ 250 is a hardened steel mounting screw with a sharp tip for indoor fixing of panel materials to wood or metal frames; 4.2 mm diameter, 38 mm length, PH2 head, zinc finish, corrosion class C1.
What materials is the 4.2x38 TERAV PUIT/MET screw suitable for?
This screw is for fixing panel materials to wood or steel frames (steel up to 0.4–0.9 mm). Suitable for plasterboard, plywood and similar indoor panel materials.
What are the diameter and length of the TERAV PUIT/MET PH2 screw?
The screw has an outer diameter of 4.2 mm and a length of 38 mm; the head diameter is specified as 11 mm in the product description.
What head type and bit are needed for the TERAV PUIT/MET PH2 screw?
The screw has a Philips PH2 head; use a PH2 bit. Recommended driving speed is 400–1200 rpm with an electric driver.
Can these screws be used outdoors or in damp conditions?
The screw has a zinc finish and corrosion class C1, intended for indoor use. For exterior or damp environments choose fasteners with higher corrosion protection.
What material is the TERAV PUIT/MET PH2 screw made of?
The screw is made of hardened steel with either a phosphated or bright zinc surface treatment; steel is listed as the base material.
What is the thread length of the 4.2x38 screw and when does it matter?
The thread length is 38 mm (the full screw length). It matters when the thread must pass through the panel and fully engage the supporting frame for a secure fix.
Is this screw suitable for a 0.5 mm steel profile?
Yes. The product states suitability for metal up to 0.4–0.9 mm, so a 0.5 mm steel profile is compatible.
What driver RPM is recommended for installing the 4.2X38 TERAV screw?
Recommended driving speed is 400–1200 rpm to ensure controlled seating without stripping the head or damaging the thread.
Are there colour options for the screw and why are they useful?
The listing notes availability in various RAL colours; coloured screws improve aesthetics and help conceal fixings when finishing interior panels.
What is the model and manufacturer of this screw?
Model A118532SP by manufacturer ESSVE; the product falls under the fasteners & lifting equipment category.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro