CONCRETE SCREW 7,5x72 TÄISKEERE PP TX30/CORRSEAL/8tk
DESCRIPTION CONCRETE SCREW 7,5x72 TÄISKEERE PP TX30/CORRSEAL/8tk price 4.28€ ESSVE
ESSVE betoonikruvi ECS on taskukohane betoonikruvi lihtsamateks töödeks, kui paigalduse kohta ei nõuta nt ETA tunnustust.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the CONCRETE SCREW 7,5x72 TÄISKEERE PP TX30/CORRSEAL/8tk
What is the CONCRETE SCREW 7,5x72 TÄISKEERE PP TX30/CORRSEAL/8tk and what is it used for?
CONCRETE SCREW 7,5x72 TÄISKEERE PP TX30/CORRSEAL/8tk is an ESSVE ECS concrete screw for affordable concrete fixings where ETA approval is not required. It is used to fasten metal and timber components to solid and hollow concrete in simpler installations.
What are the screw dimensions and how many pieces are in the pack?
The screw measures 7.5x72 mm and the pack contains 8 pieces (8tk). The dimensions are stated in the product name: 7.5x72.
What material and finish does the screw have?
The ESSVE ECS screw is steel with a CORRSEAL corrosion-protective finish and a PP polymer washer (TÄISKEERE PP), providing basic corrosion resistance and reduced friction during installation.
What screwdriver or bit is required for installation?
You need a TX30 (Torx 30) bit for installation, as indicated in the product name (TX30). Use an impact or standard driver with torque control for precise fastening.
Can these screws be used in hollow concrete or aerated concrete?
ESSVE ECS is suitable for solid and some hollow concrete types, but for aerated or highly porous concrete special anchors are recommended. Check load capacity and embedment depth for hollow substrates before installation.
Do I need anchors or pre-drilling for installation of 7.5x72?
Pre-drilling into concrete with an appropriate masonry bit is required; no separate plug is needed because this is a full-thread (TÄISKEERE) self-tapping concrete screw. Use the correct drill diameter and depth for the 72 mm length.
What is the load capacity of this screw in concrete?
The product description states ESSVE ECS is for simpler fixings without ETA approval; exact load capacity values (N/kN) are not provided. For critical applications use certified anchors with documented performance.
How does ESSVE ECS 7.5x72 differ from ETA-certified concrete anchors?
ESSVE ECS is an economical screw for lighter fixings and lacks ETA certification, so it has no officially verified load values and is not intended for structural or critical loads. ETA anchors are certified and provide documented performance for structural use.
Is this screw suitable for outdoor use and wet environments?
The screw has a CORRSEAL coating that provides basic corrosion protection, but no exact corrosion class is given. For long-term outdoor exposure or aggressive wet environments choose stainless or clearly corrosion-resistant fasteners; CORRSEAL may suffice for short-term or less demanding outdoor use.
What tools and consumables do I need for correct installation (drill bit, depth, bit)?
You need a masonry drill bit of the correct diameter and a drilling depth greater than 72 mm, plus a TX30 bit for driving. Use a hammer drill or rotary hammer for drilling and a driver with torque control for fastening.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro