CONCRETE SCREW 6,3x50 ÜP/TX30/ZN/C1/ 8tk
DESCRIPTION CONCRETE SCREW 6,3x50 ÜP/TX30/ZN/C1/ 8tk price 3.32€ ESSVE
Spetsiaalselt karastud kruvi, mis keeratakse puuritud auku otse, ilma tüüblita. Kruvil on nn hi-low-keere, mis tagab head koormusväärtused ning lihtsustab paigaldamist.Läikivaks tsingitud pinnatöötlus sobib paigaldustöödeks siseruumides, kus korrodeeruvusklassiks on C1. Standardi ISO 9223 kohaselt iseloomustavad korrodeeruvusklassi C1 sisekeskkonnad, kus on köetavad ruumid, madal õhuniiskus ja vähene saaste hulk, nt kontorid, poed, koolid ja hotellid.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the CONCRETE SCREW 6,3x50 ÜP/TX30/ZN/C1/ 8tk
What is CONCRETE SCREW 6,3x50 ÜP/TX30/ZN/C1/ 8tk and what is it used for?
CONCRETE SCREW 6,3x50 ÜP/TX30/ZN/C1/ 8tk is a specially hardened concrete screw, 6.3 mm diameter and 50 mm length with a TX30 head and bright zinc C1 finish; designed to be driven into a drilled hole without a plug for indoor, low-humidity heated environments.
Which substrates is this concrete screw suitable for?
This screw is suitable for solid concrete and solid masonry when used in a pre-drilled hole; it is not intended for hollow blocks or aerated concrete without specific assessment.
What are the screw dimensions and specs (diameter, length, head type)?
The CONCRETE SCREW is 6.3 mm diameter and 50 mm length with a TX30 (Torx 30) head; it is hardened and has a bright zinc C1 corrosion class finish.
Can these screws be used in indoor areas with above-average humidity?
The bright zinc C1 finish suits heated, low-humidity indoor environments; for higher humidity or exterior use you should choose a product with higher corrosion protection.
Do I need a plug or anchor when using this screw?
No, this hardened concrete screw is designed to be driven into a pre-drilled hole without a plug or anchor, thanks to its hi-low thread and design.
What drilling depth and drill bit size are recommended for the 6.3x50 screw?
Drill slightly deeper than the screw length (about 55 mm) and use approximately a 6.0 mm drill bit; check the manufacturer's installation charts for exact recommendations.
Is a TX30 bit suitable for fastening these screws and which tool is best?
Yes, the screw has a TX30 head; use a TX30 bit with a drill-driver or impact driver to ensure secure fastening and to avoid cam-out.
What are the benefits of the hi-low thread on this screw?
The hi-low thread provides better load-bearing in concrete and eases installation — it reduces driving effort and improves grip in the substrate without a plug.
Is this screw suitable for fixing heavy structures like furniture brackets?
The screw provides good holding in concrete due to the hi-low thread, but for very heavy or critical load-bearing installations you should verify load capacity and consider anchor solutions per guidance.
How many screws are in the pack and is the packaging suitable for site storage?
There are 8 pieces in the pack (8tk). The compact packaging is convenient for site storage, but avoid long-term outdoor storage and protect from moisture.
How does ESSVE model A161000SP differ from similar products?
The ESSVE A161000SP is a hardened concrete screw with hi-low thread, TX30 head and bright zinc C1 finish; this combination gives improved grip and easier installation compared with generic universal screws.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro