CONCRETE SCREW 6,3x40 ÜP/TX30/ZN/C1/ 8tk
DESCRIPTION CONCRETE SCREW 6,3x40 ÜP/TX30/ZN/C1/ 8tk price 2.99€ ESSVE
ESSVE betoonikruvi ECS on taskukohane betoonikruvi lihtsamateks töödeks, kui paigalduse kohta ei nõuta nt ETA tunnustust.
Description provided by sitypro.com
Related Products
Also looking for
Frequently asked questions about the CONCRETE SCREW 6,3x40 ÜP/TX30/ZN/C1/ 8tk
What is CONCRETE SCREW 6,3x40 ÜP/TX30/ZN/C1/ 8tk and what is it used for?
CONCRETE SCREW 6,3x40 ÜP/TX30/ZN/C1/ 8tk — ESSVE betoonikruvi ECS is an affordable concrete screw for simpler installations where ETA approval is not required. Suitable for fixing light to medium fixtures to standard concrete and block substrates with pre‑drilled holes.
What are the dimensions and head type of CONCRETE SCREW 6,3x40?
The screw is 6.3 mm in diameter and 40 mm long; it has an ÜP head with a TX30 drive. These specs suit concrete fixings when used with proper pre‑drilling.
Which materials can this concrete screw be used in?
The ESSVE betoonikruvi ECS is intended for standard concrete and concrete blocks; it is not ETA‑approved for special high‑strength concrete or fire‑rated constructions. Hard or hollow substrates require separate assessment and correct pre‑drilling.
Do I need to pre‑drill and what drill bit diameter should I use?
Yes, pre‑drilling is required. Use a drill bit sized for the 6.3 mm screw (commonly around 6 mm) to ensure a tight thread fit in concrete — check the manufacturer's instructions for exact diameter.
What corrosion protection does ZN/C1 indicate and where is it suitable?
ZN/C1 denotes a zinc coating with C1‑level corrosion protection; suitable for dry indoor environments and mildly damp areas but not recommended for outdoor exposure or aggressive environments.
Is this screw suitable for fixing metal profiles to concrete?
Yes, the ESSVE betoonikruvi ECS 6,3x40 is suitable for fixing light to medium metal profiles to concrete provided correct pre‑drilling and embedment depth. For heavy structures use certified anchors.
How many pieces are in the pack and are there other pack sizes?
The pack contains 8 pieces (8tk). The provided context does not list other pack sizes — check the online store for additional pack options.
What tool is needed for installation (which bit/drill)?
You need a TX30 bit and an impact or standard driver with torque control. Use a concrete drill bit for pre‑drilling; do not use the hammer drill to drive the screw without proper torque control.
How does the ECS model differ from ETA‑certified anchors?
The ESSVE betoonikruvi ECS is an economical option for simple installations and is not ETA‑certified; ETA anchors are tested and approved for load‑bearing and critical fixings. Use ECS for non‑structural, everyday tasks and ETA‑certified anchors for critical applications.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro