POLYSTYRENE EXPANDED MINI EPS80 25X1000X600
| Package dimensions | 100,00 x 60,00 x 2,50 cm |
| Net weight | 0,250 kg |
Expanded Polystyrene EPS 80 — Mini insulation board 25×1000×600 for foundations
Rigid EPS board designed to insulate foundations and plinths; Estplastil offers the largest selection for these applications. EPS 80 provides reliable thermal insulation, high moisture resistance and load-bearing capacity for moderate-use foundations.
Key Benefits
- High moisture resistance suitable for below-grade use
- Load-bearing capacity appropriate for moderate-use foundations and plinths
- Recommended material (Estplast EPS 80) for foundation and plinth insulation
- Part of Estplastil’s largest product range for foundations and sokles
- Available in compact mini board format (25×1000×600)
Good thermal insulation — core feature for foundation application
Applications
Intended for thermal protection at foundation and plinth level.
- Plinth (sokel) insulation
- Perimeter foundation edge insulation
- Base insulation for basement wall lower sections
Insulation of building foundations
What to Consider When Choosing
- Confirm moisture resistance for below-grade conditions
- Verify load requirements — EPS 80 is for moderate-use applications
- Check panel dimensions and package measurements for fitting
- Compare price and availability before you buy
Assess required thermal performance for the building
Specifications
- Nominal panel size: 25×1000×600 (as stated in product name)
- Package measurements: 100.00 x 60.00 x 2.50 cm
- Total weight: 0.25 kg
- Primary application: foundations and plinths
Material: Expanded polystyrene (EPS 80)
Why Buy from SityPro
- Wide selection and reliable product features for foundation insulation
- Simple ordering and customer support for product questions
- Delivery available to Estonia and Finland
- Competitive price options and convenient shopping experience
Buy online easily at SityPro with clear price information
Description provided by sitypro.com
Also purchase from categories
Battery screwdrivers
Hydro-insulation and reinforcement materials
Wall levelling mixtures
Dowels
Screws
PVC wall panels
Metal frames, fasteners
Thermal insulation / construction woolRelated Products
Also looking for
Frequently asked questions about the Expanded Polystyrene MINI EPS80 25x1000x600
What is POLYSTYRENE EXPANDED MINI EPS80 25X1000X600?
POLYSTYRENE EXPANDED MINI EPS80 25X1000X600 is an Estplast EPS 80 insulation board sized 25 mm x 1000 x 600 mm for insulating foundations and plinths. It offers good thermal insulation, high moisture resistance and is rated for moderate loads.
What are the dimensions and weight of POLYSTYRENE EXPANDED MINI EPS80 25X1000X600?
The board is 25 mm thick with dimensions 1000 x 600 mm; package measurements are 100.00 x 60.00 x 2.50 cm. The total weight listed is 0.25 kg.
Where is POLYSTYRENE EXPANDED EPS80 suitable to use?
POLYSTYRENE EXPANDED MINI EPS80 is suitable for insulating foundations and plinths under moderate service loads — e.g. strip foundations, external plinths and perimeter insulation where moisture resistance and thermal insulation are required.
Is POLYSTYRENE EXPANDED EPS80 moisture resistant and usable in wet areas?
POLYSTYRENE EXPANDED MINI EPS80 has high moisture resistance and is recommended for foundations and plinths exposed to moisture. For prolonged ground contact, combine it with appropriate waterproofing to ensure long-term protection.
What load-bearing capacity does EPS 80 have and can this board take moderate loads?
EPS 80 is designed for moderate service loads; the MINI EPS80 board is suitable for typical foundation and plinth loads when installed correctly. For heavier loads, select boards with a higher density grade.
How to cut and install POLYSTYRENE EXPANDED MINI EPS80 25 mm?
The 25 mm board can be cut with a handsaw, hot wire cutter or utility knife to marked dimensions. Fixing is done with mechanical fasteners, adhesives or mortar depending on the foundation design and manufacturer guidance.
How does MINI EPS80 differ from other EPS grades for foundations?
MINI EPS80 is a mid-density grade offering good thermal and moisture properties for moderate loads; it is lighter and usually less costly than higher-density EPS but has lower load-bearing capacity. For higher point or overall loads, choose a denser EPS grade.
Can this board be used under blinding concrete or external horizontal ventilated surfaces?
Yes, POLYSTYRENE EXPANDED MINI EPS80 can be used under blinding concrete and external horizontal constructions provided correct waterproofing and layer build-up are followed. For ventilated coverings ensure adequate ventilation gaps and fixing.
What materials are compatible with POLYSTYRENE EXPANDED MINI EPS80 during installation?
MINI EPS80 is compatible with cementitious mortars and adhesives, bitumen and polymer waterproofing membranes, and mechanical fixings. Avoid contact with strong organic solvents.
How is the product packaged and can the board be cut on site?
Package measurements are 100 x 60 x 2.5 cm, suitable for single-board transport and storage. The board can be cut on site with a handsaw, utility knife or hot-wire cutter.
Where to buy Expanded Polystyrene MINI EPS80 25x1000x600?
You can buy Expanded Polystyrene MINI EPS80 25x1000x600 in our online store for 1.71€. Category: General purpose polystyrene products.
What is the price of Expanded Polystyrene MINI EPS80 25x1000x600?
The current price of Expanded Polystyrene MINI EPS80 25x1000x600 is 1.71€. Brand: ESTplast.
Expanded Polystyrene MINI EPS80 25x1000x600 — specifications and description
Model: 000-317366ASP. Category: General purpose polystyrene products. Brand: ESTplast. Price: 1.71€.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro