PAINTING FABRIC ETIX 105/25 45g/m2

45 g/m² fiberglass painting fabric is suitable for preparing a smooth surface to be puttyed, painted or wallpapered and for strengthening plasterboards.

• Covers finer cracks and remains minimally noticeable
• The use of painter's cloth helps to prevent the appearance of cracks on the finished surface

Advantages:
• Helps to prevent the formation of cracks on the finished surface
• Convenient to use
• The fabric's internal thread structure ensures its high moisture resistance, flexibility in installation and durability
• High humidity tolerance

Installation:
• The substrate on which the painting fabric is applied must be dry, clean, flat and free of particles that prevent adhesion
• Minimum air and substrate temperature during installation is +5 °C
• Before installing the canvas, cover the substrate with a suitable adhesive
• When applying the glue with a roller, make sure that the surface is evenly covered with the glue, as unevenness under the fabric can spoil the appearance of the surface
• When applying glue using the spray method, it is important to follow the uniform and material consumption specified by the glue manufacturer, so that too much glue is not applied to the substrate
• To avoid structural differences, install the fabric only on one side with an overlap of approx. 2-5 cm wide
• Press the glued tiles completely with a wallpaper brush or roller, while making sure that there are no air bubbles under the fabric
• Then cut through the overlapping areas of both tiles at the same time and remove the cut strips
• In this way you achieve a well-matched joint without overlap
• It is not recommended to cover the inner corner with painting fabric
• After fixing the corners, cut off the excess fabric with a knife
• Continue with the fabric when gluing the outer corners
• If finishing is done in several steps, make sure the fabric is completely dry before starting the next step

• Material: fiberglass
• Storage: keep dry