FACADE REINFORCING MESH ETIX 160 160g/m2 55m2/ROLL
1 roll = 55 m²
FACADE REINFORCING NETTING ETIX 160 160g/m2 55m2/ROLL Fiberglass reinforcing mesh PREMIUM is used for reinforcing insulation boards in facade insulation systems (SILS, ETICS). The reinforcing mesh covered with polymer dispersion helps to prevent the formation of cracks on the finishing surface to be reinforced. ADVANTAGES
· Helps to prevent the formation of cracks on the finishing surface to be reinforced
· High resistance to mechanical pressure
· Alkali resistant
· Non-stretchy and tear-resistant
· Meets the requirements of ETAG-004 and is allowed to be used in any facade heating system
INSTALLATION
Apply the reinforcing compound across the width of the reinforcing mesh tile to the insulation boards so that the mixture thickness is about 2/3 of the final layer thickness. Press the reinforcing mesh straight, without wrinkles, into the mixture. Spread the mixture through the mesh. Install the following tiles with an overlap of 10 cm. Putty over the reinforcing mesh so that the mesh is completely covered with the mixture. The overall thickness of the reinforced layer depends on the reinforcement mixture used.
MATERIAL
Fiberglass coated with polymer dispersion
STORAGE
Store in an upright position, keep dry and protected from moisture.
Description provided by sitypro.com