Waterproofing MIRA 4400 MULT. 6kg
The photographs are for illustrative purposes only.
Get AI analytics on product Waterproofing
MIRA 4400 MULT. 6kg:
MIRA 4400 MULT. 6kg:
In stock
Product Code: 000-330930ASP
Specification
- Type: Waterproofing
- Manufacturer: Mira
| Package dimensions | 31,00 x 15,00 x 20,00 cm |
| Net weight | 6,000 kg |
HÜDR.MASS MIRA 4400 MULT. 6kg
Ülielastne veetõke märgade ruumide kaitseks. ETAG 022
Omadused
• Ühekomponentne pasta
• Hall, hea nakkega
• kasutada koos tarvikutega
• Hea prao sildamisvõime
• Hea veeaurutakistus
• Lihtne kasutada
• Ei talu UV-kiirgust
Kasutusala
• Sisetingimustes
• Märg ruum
• Seinad ja põrandad
• Betoon, kergbetoon
• Tasandatud müüritis
• Kuivkrohvplaat
• Tasandussegu, puitpõrand
Lisateave
• mira veetõkkesüsteemi osa
• Kulu 1–1,5 kg/m²
• 2, 6 ja 15 kg purk
• Töötemperatuur 10 – 25?C
• Kuiva membraani paksus 0,45 mm
• Kuivamisaeg 6-12 h
• Säilivusaeg 12 kuud
Product details
Total weight: 6.00 kgPackage measurements: 31.00 x 15.00 x 20.00 cm
Description provided by sitypro.com
Specifications and equipment of the goods,
can be changed by the manufacturer without notice.
can be changed by the manufacturer without notice.
Related Products
Also looking for
Frequently asked questions about the Waterproofing MIRA 4400 MULT. 6kg
What is Waterproofing MIRA 4400 MULT. 6kg and where is it used?
Waterproofing MIRA 4400 MULT. 6kg is a one-component highly elastic paste in the Mira waterproofing system, compliant with ETAG 022 for wet room protection. It is for indoor use on walls and floors in bathrooms and wet rooms over concrete, lightweight concrete, levelled renders, plasterboard and timber floors; consumption 1–1.5 kg/m².
Is MIRA 4400 MULT suitable for use over underfloor heating?
Yes, MIRA 4400 MULT can be used on heated floors provided the application temperature is between 10–25°C. Ensure correct drying to achieve a 0.45 mm dry membrane thickness and follow Mira system layering instructions.
What is the recommended membrane thickness and consumption for MIRA 4400 MULT?
The dry membrane thickness is approximately 0.45 mm, with a consumption of 1–1.5 kg/m² for normal application. Use Mira reinforcement accessories for joints and transitions.
Can I apply MIRA 4400 MULT directly onto plasterboard and levelled renders?
Yes, it is suitable for plasterboard and dry levelled renders provided the substrate is sound and free of dust and grease. Prime the surface if required per the Mira system instructions.
How long does MIRA 4400 MULT take to dry before tiling?
Drying time is 6–12 hours depending on layer thickness and conditions (application temperature 10–25°C). Wait until the membrane is fully dry before tiling.
Do I need reinforcement tape for joints and corners with MIRA 4400 MULT?
Yes, use Mira reinforcing accessories (tapes and collars) at joints, corners and transitions together with the paste to ensure crack bridging and long-term sealing performance.
Can MIRA 4400 MULT be used outdoors or exposed to UV light?
No, MIRA 4400 MULT is not UV-resistant and is intended for indoor use only. For exterior applications choose products specifically designed for UV exposure.
What packaging sizes is MIRA 4400 MULT available in and what is the weight of the 6 kg bucket?
MIRA 4400 MULT is available in 2, 6 and 15 kg buckets; this listing is the 6 kg bucket. Package dimensions are 31×15×20 cm and the gross weight is 6.00 kg.
What is the working temperature range for applying MIRA 4400 MULT?
The recommended application temperature range is 10–25°C. Applying outside this range may affect curing and adhesion properties.
How should I store MIRA 4400 MULT and what is its shelf life?
Shelf life is 12 months in the unopened container. Store in a dry place, protected from freezing and direct sunlight.
How does MIRA 4400 MULT differ from other Mira waterproofing pastes?
MIRA 4400 MULT is a one-component highly elastic paste for interior wet rooms with good crack-bridging but is not UV-resistant. Other Mira products may be two-component, have different adhesion or curing properties, or be formulated for exterior/UV-exposed use.
Where to buy Waterproofing MIRA 4400 MULT. 6kg?
You can buy Waterproofing MIRA 4400 MULT. 6kg in our online store for 36.35€. Category: Hydro-insulation and reinforcement materials.
What is the price of Waterproofing MIRA 4400 MULT. 6kg?
The current price of Waterproofing MIRA 4400 MULT. 6kg is 36.35€. Brand: Mira.
Waterproofing MIRA 4400 MULT. 6kg — specifications and description
Model: 000-330930ASP. Category: Hydro-insulation and reinforcement materials. Brand: Mira. Price: 36.35€.
Google reviews
Все хорошо!
SityPro
Здравствуйте.
Очень довольна товаром. Первое средство, при котором не надо применять силу. Доставка быстрая. В будущем буду заказывать ещё.
SityPro
Yksi tilatuista tuotteista oli vahingoittunut kuljetuksen aikana. Sity Pro korvasi vahingoittuneen tuotteen nopeasti ja tehokkaasti. Tämä yhdistettynä hyvään asiakaspalveluun ja lyömättömiin hintoihin saa minut suosittelemaan Sity Pro:ta. ????
SityPro
Замовляв навісне обладнання для мотоблока Daewoo. Все на вищому рівні, доставка в Україну зайняла біля 5днів.
SityPro
Tilasin 15L sakret LP3 betonin notkistinta. Paketti tuli postiautomaattin 5 päivässä. Eli kauppa vaikuttaisi olevan luotettava.
SityPro