Frequently asked questions about the Structure wallpapers 1.06x25 category
What are Structure wallpapers 1.06x25 and what are they used for?
Structure wallpapers 1.06x25 are textured wallpaper rolls sized 1.06×25 m, paintable with factory texture plus the option to choose colour after installation. They mask small substrate imperfections, add depth with relief texture and speed up hanging with fewer seams (one roll ≈ up to 26.5 m²).
How much area does one 1.06×25 m roll cover?
One 1.06×25 m roll covers up to approximately 26.5 m². For accuracy: wall area = perimeter × height − openings; add 5–12% waste for matching and cuts.
Do Structure wallpapers 1.06×25 have non-woven or paper backing?
The category includes both non-woven (fleece) and paper-backed wallpapers. The roll label shows the hanging method (paste-the-wall often for non-woven, paste-the-paper for paper) — always follow the manufacturer pictograms.
What adhesive should I use for Structure wallpapers 1.06×25?
Use adhesive matched to the backing: non-woven wallpapers need non-woven/paste-the-wall adhesives, paper-backed require paste-the-paper glue. Use reinforced adhesive for heavier textured rolls and follow the roll’s instructions.
Can I paint Structure wallpapers 1.06×25 with standard water-based paint?
Yes — water-based acrylic/latex interior paints are recommended. Check the manufacturer’s pictograms on the roll for information on how many repaint cycles the wallpaper can withstand.
Do I need to level the wall before hanging Structure wallpapers 1.06×25?
The surface should be dry, sound and free of loose coatings; major unevenness and deep cracks should be levelled with filler. The texture hides minor defects, but proper preparation and priming improve adhesion and finish.
How do 1.06×25 rolls differ from narrower 1.06×10 m rolls?
1.06×25 rolls cover more area (≈26.5 m²) and reduce seams and hanging time versus 1.06×10 rolls. Narrower rolls are easier to transport and store but need more matching and labour during installation.
Are Structure wallpapers 1.06×25 suitable for kitchen or bathroom?
They are suitable for living areas, but for high-humidity zones (bathroom or splash areas in kitchens) moisture-resistant materials are preferable. In kitchens use washable paints and ensure good ventilation.
How to choose paint for Structure wallpapers 1.06×25 without losing the texture?
Use matte or satin water-based acrylic/latex paints and apply thin coats — high gloss will flatten the relief. Start with a thinner primer/first coat and add further coats sparingly to preserve texture depth.
Do I need to consider pattern direction when estimating rolls for 1.06×25 wallpapers?
Textured wallpapers are often non-directional, but if a specific repeat/pattern exists you must account for it and add 5–12% waste. Always check the model description and manufacturer instructions.