In Stock
24.45€ / pc.
Ex Tax: 19.72€ / pc.
5.43€ / l
In Stock
30.50€ / pc.
Ex Tax: 24.60€ / pc.
6.10€ / l
In Stock
30.50€ / pc.
Ex Tax: 24.60€ / pc.
6.10€ / l
In Stock
30.50€ / pc.
Ex Tax: 24.60€ / pc.
6.10€ / l
In Stock
30.50€ / pc.
Ex Tax: 24.60€ / pc.
6.10€ / l
In Stock
16.60€ / pc.
Ex Tax: 13.39€ / pc.
6.64€ / l
In Stock
16.90€ / pc.
Ex Tax: 13.63€ / pc.
6.76€ / l
In Stock
16.90€ / pc.
Ex Tax: 13.63€ / pc.
6.76€ / l
In Stock
16.90€ / pc.
Ex Tax: 13.63€ / pc.
6.76€ / l
In Stock
25.99€ / pc.
Ex Tax: 20.96€ / pc.
10.40€ / l
In Stock
12.76€ / pc.
Ex Tax: 10.29€ / pc.
12.76€ / l
In Stock
12.92€ / pc.
Ex Tax: 10.42€ / pc.
12.92€ / l
In Stock
8.40€ / pc.
Ex Tax: 6.77€ / pc.
8.40€ / l
In Stock
14.90€ / pc.
Ex Tax: 12.02€ / pc.
5.52€ / l
In Stock
59.90€ / pc.
Ex Tax: 48.31€ / pc.
6.66€ / l
In Stock
32.28€ / pc.
Ex Tax: 26.03€ / pc.
11.95€ / l
In Stock
9.50€ / pc.
Ex Tax: 7.66€ / pc.
10.56€ / l
In Stock
66.55€ / pc.
Ex Tax: 53.67€ / pc.
7.39€ / l
In Stock
23.50€ / pc.
Ex Tax: 18.95€ / pc.
8.70€ / l
In Stock
9.60€ / pc.
Ex Tax: 7.74€ / pc.
10.67€ / l
In Stock
12.92€ / pc.
Ex Tax: 10.42€ / pc.
12.92€ / l
In Stock
59.25€ / pc.
Ex Tax: 47.78€ / pc.
6.58€ / l
Frequently asked questions about the Deck board impregnation agent category
What is a Deck board impregnation agent and what does it do?
A Deck board impregnation agent is a specialized wood treatment that penetrates decking boards to reduce moisture uptake, provide UV and biological protection (mould, rot, insects), and enhance the natural grain—extending the service life and appearance of outdoor timber.
How do oil‑based and water‑based impregnation agents differ?
Oil‑based agents penetrate deeply, enhance grain and give a warm matte finish (e.g. terrace & wood oils), while water‑based variants dry faster, offer good UV resistance and are easier to apply and clean up.
Which impregnation agent is best for new vs. weathered decking boards?
For new decking use a penetrating oil or a water‑based product with UV protection to prevent fading; for weathered boards clean and sand first, then apply a deep‑penetrating, antiseptic impregnation to restore and protect the timber.
What is the coverage (litres per m²) for impregnation agents and how to calculate needed quantity?
Coverage varies by product but penetrating agents typically use about 0.1–0.2 L/m² per coat; check the product label and allow for two coats for reliable protection.
Can I apply the impregnation agent myself and which tool is best — brush, roller or sprayer?
Yes — most agents are DIY‑friendly. A brush or roller ensures good penetration and even application; a sprayer is faster for large areas but should be followed by brushing to avoid pooling.
Do decking boards need cleaning and drying before impregnation?
Yes — remove dirt and mould, let the timber fully dry (typically 24–48 hours depending on conditions), and sand damaged areas to ensure even absorption.
Will the impregnation agent protect against insects and fungal decay?
Yes — many impregnation agents include antiseptic and insect‑repellent additives (e.g. Anti Insekt Plus formulations) that inhibit mould, rot and deter pests when specified in the product description.
What colour options are available and will the natural wood look be preserved?
There are clear oils and pigmented glazes (teak, oregon, etc.) like PINOTEX CLASSIC LASUR; transparent and semi‑transparent products preserve and enhance grain, while pigmented coatings provide more colour and coverage.
How many coats are required and how often should decking be re‑treated?
Typically 1–2 coats on first application. Re‑treatment is normally every 1–3 years depending on exposure and product type — oils generally need more frequent maintenance than water‑based systems.
Are these agents suitable for all wood species — softwoods and hardwoods?
Yes — most impregnation agents in this category work on both softwoods (pine, spruce) and hardwoods; check the specific product guidance (e.g. TERRACEOIL, PINOTEX) for any species‑specific recommendations.
Which popular products in this category are suitable for high moisture and northern climates?
For wet and variable climates choose deep‑penetrating, hydrophobic and antiseptic formulations such as VIVACOLOR VILLA PROTEKT, PINOTEX IMPRA and ANTI INSEKT PLUS—prefer products that also include UV protection.