Frequently asked questions about the Hooks, brackets, blocks, wedges category
What are Hooks, brackets, blocks, wedges and what are they used for?
Hooks, brackets, blocks, wedges are small fastening and installation items for hanging, levelling and fixing building or finishing elements. The category includes screw pigtail hooks (A2, ZN), S‑hooks, installation wedges and spacer blocks in various thicknesses for panel and structure adjustment.
What is the difference between PIGTAIL HOOK A2 8,8x120 and ZN M10x100 and which to choose?
The A2 8,8x120 hook is stainless steel (better corrosion resistance) with 120 mm length/diameter spec; the ZN M10x100 is zinc‑plated with M10 thread and 100 mm length. Choose A2 for wet or outdoor use, ZN is suitable for dry indoor installations.
What are VAHEKLOTS MIX 3-15 MM spacer blocks for and how to use them correctly?
VAHEKLOTS MIX 3–15 mm are spacer blocks for levelling panels, door frames and cladding by creating consistent gaps. Choose the required thickness (3–15 mm), place blocks at support points (16 pcs per pack) and secure with fixings to hold the alignment.
Which spacer block thickness should I pick for levelling tiles — 3, 5, 10 or 15 mm?
Use 3 mm for fine adjustments, 5 mm for small levelling, and 10–15 mm for larger height differences. Common practice is to use the MIX 3–15 mm kit to combine blocks and reach the exact height needed.
Is the S-HOOK A2 D4mm suitable for hanging heavy items?
The S‑hook A2 D4 mm is stainless steel with 4 mm wire and is suitable for light to medium loads such as tools, lamps or decor. For heavy loads, choose a thicker, load‑rated hook and verify the manufacturer's load capacity.
What does the PAIGALDUSKIILUD 48 TK kit include and where are the wedges used?
The PAIGALDUSKIILUD 48 TK kit includes 48 installation wedges of various sizes for temporary support and levelling of panels and tiles during installation. They are used to create gaps and hold elements in place until final fixing.
How do I use the PLAADI KANDMISE KÄEPIDE DUOPLAC 2 TK handles to carry panels?
The DUOPLAC carrying handles (2 pcs) attach to the panel with suction or grip and provide a secure hold for lifting. Fit handles per instructions and respect their rated carrying capacity while lifting and carrying the panel.
What is the VEDRUSPLINTIDE KOMPLEKT 150 TK kit and where are spring clips used?
VEDRUSPLINTIDE KOMPLEKT 150 TK is a set of 150 spring clips (cotter/pigtail pins) used to fasten shafts, axles and components in mechanical joints. Spring clips enable quick securing into a drilled hole without nuts or separate retainers.
How do I combine VAHEKLOTS 5 mm and 10 mm spacer blocks for precise height adjustment?
Stack 5 mm and 10 mm spacer blocks to reach the required height (e.g. 10+5=15 mm). Place blocks at support points using the 16‑piece pack and check horizontal alignment with a spirit level.